This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - arch33angel
1
« on: 04 November 2017, 09:15:20 am »
Hi, thank you for getting some info on them. I'd be about 11 stone togged up with top box on. The springs where fine for out of town riding but I'm in town 80% of the time. The stock progressives are back in now and while not perfect by any means the shit road surfaces aren't as jarring now.
2
« on: 03 November 2017, 10:29:26 am »
The legend on the springs reads 08619-80 FFS-KBA 91119 What this means I don't know.
3
« on: 31 October 2017, 11:45:59 pm »
Only fitted to my 2002 Foxeye for a few months. Being a lightweight 9.5 stone and doing mainly town riding they were just too stiff so I've went back to stock springs. These are virtually good as new. £60 inc delivery.
4
« on: 20 June 2016, 03:48:27 pm »
Ok cheers. I'll just stick it on and see what it's like.
5
« on: 17 June 2016, 03:03:29 pm »
Hi, does anyone know what these numbers mean on basic FZS600 Ohlins shock spring 01093-64/160 L3113 ? Thanks.
6
« on: 23 November 2015, 12:36:08 pm »
Does anyone know if there are any fork preload adjusters to fit FZS600 Foxeye? Have looked on eBay but only have for earlier Fazers. Thanks.
7
« on: 31 May 2015, 01:11:33 am »
Hi, has anyone got a foxye screen in good nick? Thanks
8
« on: 04 May 2015, 08:42:39 pm »
Thanks Jules-C, much appreciated.
9
« on: 04 May 2015, 05:14:53 pm »
Hi, does anyone know the size of the two large bolts that hold the two halves of the rear caliper together? Thanks.
10
« on: 20 January 2015, 01:16:12 pm »
Brand new boxed. S46DR KA009. Standard spring. Southend.
11
« on: 05 January 2015, 06:02:29 pm »
As the title says. Comes boxed with manual and adjustment spanner. £325
12
« on: 07 November 2014, 09:58:13 am »
Hi, yes it was the adjuster at the lever was not wound out far enough. A couple of turns of the screw outwards seems to have done the job. Thanks for the help guys.
13
« on: 04 November 2014, 03:14:36 pm »
Thanks I'll give that a go and see.
14
« on: 04 November 2014, 02:43:22 pm »
Hi, today I had problems getting the bike into neutral. 1st to 2nd, 2nd to 1st a few times before it would hit and stay in neutral. Any ideas? Thanks.
15
« on: 12 October 2014, 01:36:27 am »
Thanks. It's 530 chain.I lost the rivet link but have a different brand one knocking about. I'll take the advice and just buy one of the same make.
16
« on: 11 October 2014, 01:09:26 am »
Does anyone know if any brand of rivet link fits different brands of chain? Thanks.
17
« on: 13 June 2014, 10:16:21 am »
Good condition. No cracks. Fibreglass. Collection from Shoeburyness/Southend. Cheers.
18
« on: 31 May 2014, 11:03:49 am »
Hi, anybody have a stock screen for sale? Cheers.
19
« on: 16 May 2014, 09:14:42 am »
Hi, could someone do me a favour and measure the length of a standard bar end and let me know? Thank you.
20
« on: 09 May 2014, 11:34:14 pm »
Thanks Limax. I grabbed the nearest container which happened to be the mutt's water bowl
21
« on: 09 May 2014, 09:00:53 pm »
Hi, I took my tank off today and while I was doing it petrol started to piss out of one of two little metal tube things about 10mm in length that sit together near the fuel tap. It stopped after about 30 seconds. What are these? I have (had) almost a full tank of juice. Thanks.
22
« on: 03 May 2014, 10:37:23 pm »
I've had a red one, a blue one and another yellow one
23
« on: 03 May 2014, 08:22:03 pm »
Thank you. I'm selling one but buying another one. Silver for yellow.
24
« on: 03 May 2014, 07:30:44 pm »
Cheers. I've probably thrown a couple of these out since I've been a Foxeye junkie and of course could use one now. If it turns up would you give me a shout. Many thanks.
25
« on: 03 May 2014, 06:48:55 pm »
Good condition black hugger for Foxeye. Stealer has offered me a low price on my Fazer so trying to sell off some extras before he gets his mitts on it. Southend area.
|