Date: 28-03-24  Time: 14:01 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dcurzon

Pages: [1] 2 3 ... 13
1
For Sale & Wanted / Re: For Sale - Boxeye headlight
« on: 07 November 2018, 03:23:49 pm »
Or maybe £50 all in :)

2
For Sale & Wanted / For Sale - Boxeye headlight
« on: 25 October 2018, 10:42:31 pm »
Got a box eye headlight unit sat in the garage if anyone can make use of it. 
Would be ideal for a HID conversion and retaining your original headlight unit also.
How does £55 posted sound?

3
For Sale & Wanted / Re: Givi Maxia
« on: 10 May 2017, 08:11:45 pm »
Hi
I stuck it on eBay so you might get it for a song.
Look at this on eBay  http://www.ebay.co.uk/itm/391779167152


Baseplate, it takes the Monokey Baseplate.  Which iirc has 2 "hooks" towards the front and a sticky up bit at the rear,  so the box slides onto the hooks and pushed down on the stick up bit.

4
For Sale & Wanted / Re: Givi Maxia
« on: 09 May 2017, 02:31:27 pm »
The Triumph badge could be replaced, but it didn't seem to slow it down any :)

5
For Sale & Wanted / Box eye Headlight
« on: 09 May 2017, 02:21:16 pm »
Boxeye headlight unit. All bolt tabs in place.
Ideal for doing a HID conversion.


Collect from Harlow, Essex, or might be able to post.


£25

6
For Sale & Wanted / Givi Maxia
« on: 09 May 2017, 02:15:07 pm »
Givi Maxia, think it's E52 model possibly?
2 keys.
Collect from Harlow,  Essex


Revised: on eBay,  no reserve.
Look at this on eBay  http://www.ebay.co.uk/itm/391779167152

7
FZS600 Fazer / Re: FZS600 track day
« on: 09 May 2017, 11:54:25 am »
I've only ever had noise issues at one circuit.


Assen.


[size=78%]Considering it was a Ducati event, on track thursday through to racing sunday, noise testing thurs/fri/saturday.  Sunday had no issues.[/size]




EVERYONE had full race systems. 


Everyone was clamping empty coke cans over the exhaust to try and muffle the sound a fraction!!

8
FZS600 Fazer / Re: Stripped output shaft...
« on: 09 May 2017, 11:48:55 am »
an in with the new :)


9
FZS600 Fazer / Re: Stripped output shaft...
« on: 09 May 2017, 11:47:17 am »
Well its out with the old... collected by a FOC-U member

10
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 28 April 2017, 08:57:36 pm »
This has been sold and collected.
Thanks

11
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:44:48 pm »
it could do with a really good wash too.


Some short vid from an ELAM ride last summer

12
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:43:19 pm »
pics

13
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:42:20 pm »
pics

14
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:41:47 pm »
pics

15
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:41:19 pm »
pics

16
For Sale & Wanted / Re: '99 FZS600 spares/repairs
« on: 25 April 2017, 08:40:53 pm »
pics

17
For Sale & Wanted / '99 FZS600 spares/repairs
« on: 25 April 2017, 12:57:23 am »
Output shaft stripped it's thread...

Plus points:
Properly fitted HID projectors (new bulbs fitted)
2014 r6 shock
Pr4 front less than 500 miles
Bt23 rear less than 750 miles
Givi rack
Bar risers
Heated grips  (worn but work)
SS headers
K&N air filter
Scottoiler
3 months mot remaining.

Bad points:
Stripped output shaft.
Top fairing is a bit knocked up but functional


Engine has 90k but has been as good as gold.

I'm the 2nd owner and always used k&n air and oil filters and regular oil changes.

Located in Essex, 5 mins off m11.
£450

18
FZS600 Fazer / Re: Stripped output shaft...
« on: 24 April 2017, 09:55:18 pm »
I dont really want the hassle of parting it out.
If someone wants it at 450 they can take it.
Bring a welder and happy for you to weld the nut on and have a cuppa and ride it away, or bring a van or trailer.  Or risk riding it as is.

Essex, 5 mins off m11

19
FZS600 Fazer / Re: Stripped output shaft...
« on: 24 April 2017, 07:04:34 am »
Had it welded up by local bike shop, lasted a couple more weeks but the weld didn't hold.  Can't be bothered with it now, so she'll be up for sale.
Plus points:
Properly fitted HID projectors (new bulbs recently fitted)
Plus spare stock headlight
2014 r6 shock
Pr4 front 500 miles
Bt23 rear 750 miles
Givi rack
Bar risers
Heated grips  (worn but work)
SS exhaust
K&N air filter
Couple of months mot remaining.

Bad points:
Stripped output shaft.
Engine has 90k but has been as good as gold.

I'm the 2nd owner and always used k&n air and oil filters and regular oil changes.

20
FZS600 Fazer / Re: Stripped output shaft...
« on: 29 March 2017, 11:54:37 pm »
I'll get a mobile welder type guy to blob it on.

It was torqued to FT, and the Luckington tab was in place

21
FZS600 Fazer / Stripped output shaft...
« on: 29 March 2017, 08:56:40 pm »
My 90k old '99 was making the odd rattle, so today, having just shelled out on tyres, I decided to check, and look and behold,  the front sprocket nut had spun loose and Stripped the shaft.  (Yes it was the newer type nut).

Options?

Or break the bike?

It's my work horse :/

22
http://foc-u.co.uk/index.php/topic,15666.0.html


This kit was actually created on my bikes' headlights, a few years ago when i got in touch with RFL. i sent them a set of headlights and they used it as a template to create the kit.  Its not just the projectors, but a backplate to replace the reflectors on each side as well, plus the gubbins. 

23
General / Re: LED's in clocks
« on: 18 November 2014, 10:46:58 am »
i went back to stock yamaha bulbs.

24
General / Re: White Collar Boxing...
« on: 17 November 2014, 12:58:31 pm »
Well it seems i am losing my training ground (works underground car-park) due to redundancy.  Might have 2-3 weeks left here.  On the plus side, means i dont have to worry about rolling in to work with black eyes :D
 

25
General / Re: White Collar Boxing...
« on: 13 November 2014, 10:50:29 am »
hahahaha Frosties - yeah, i have had it in the back of my mind about what if adrenalin & instinct makes me throw a spinning hook kick?  :) :D
But i'm not as flexible or as fast as i was then, so i dont think that'll be an issue.

Pages: [1] 2 3 ... 13