Date: 29-03-24  Time: 09:57 am

Author Topic: engine re-paint, silver  (Read 20846 times)

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
engine re-paint, silver
« on: 06 May 2015, 08:27:31 pm »
The silver paint on my thou's engine is flaking bad, ive just replaced the fork seals so thought it a good time to sort the flakey paint out, forks off the bike so I can easily get to the front of the engine, started dismantling at the weekend, exhaust, radiator, oil filter +oil , clutch cover, generator cover and timing cover, going to blast the three covers as they are quite bad and are the first thing you see, will paint them off the bike and refit with new gaskets, front of the engine I will attack with gunk and a selection of wire brushes, a lot of it will be hidden by the rad and exhaust but it looks awful  :eek....I bought a blast gun years ago but my compressor is not quite man enough to power it, got loads of air at work, most of it hot  :rolleyes and the boss is away untill next week, guess what iam doing friday  ;)

so, anyone else done this job ?.or got any tips ?...
« Last Edit: 06 May 2015, 08:31:45 pm by red98 »
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #1 on: 06 May 2015, 08:33:11 pm »
.
One, is never going to be enough.....

esetest

  • GP Hero
  • ******
  • Posts: 1,148
    • Main bike:
      FZS 1000 Gen1
    • - MotoguzziV7racer
    • View Profile
Re: engine re-paint, silver
« Reply #2 on: 06 May 2015, 09:07:08 pm »
Repainted mine a couple of years ago , I cleaned the engine with engine cleaner , removed the loose bits with sandpaper , lightly rubbed the engine down , used Simonez is aluminium engine paint , doesn't need priming , I reckon it will be good for a couple more years , I did remove the radiator , downpipe , sprocket and air filter covers beforehand and used loads of paper and masking tape .

old son

  • GP Hero
  • ******
  • Posts: 1,231
    • Main bike:
      FZS 1000 Gen1
    • - ZX10R
    • View Profile
Re: engine re-paint, silver
« Reply #3 on: 07 May 2015, 06:13:35 am »
I would not be grit blasting my engine with all of those holes leading to the internals. I know somebody who had an old Gardener engine and did exactly the same as you intend. He sealed all the holes, or so he thought. Guess how long the engine lasted when he started it up? It costs thousands for a strip down.

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #4 on: 07 May 2015, 06:48:04 am »
hi OLD SON......just going to blast the covers off the bike,then a good flushing with gunk and an airline  ;) ..then do as ESETEST ,with the rest of the engine ...
One, is never going to be enough.....

bigbluebear

  • GP Hero
  • ******
  • Posts: 1,747
    • Main bike:
      Other
    • - Kawasaki Z1000SX
    • View Profile
Re: engine re-paint, silver
« Reply #5 on: 07 May 2015, 09:20:04 am »
I did mine while the removing the induction system thingy......cleaned it down with an anti greaser, lightly sanded off the remaining crap and used Simoneze Aluminium high temperature paint....came up a treat
« Last Edit: 07 May 2015, 09:31:14 am by bigbluebear »

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #6 on: 07 May 2015, 06:19:32 pm »
That looks good BBB.....painting the exhaust clamps was a good idea, mine are in a terrible state   :\
One, is never going to be enough.....

bludclot

  • WSB Pack Hound
  • *****
  • Posts: 539
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: engine re-paint, silver
« Reply #7 on: 10 May 2015, 01:41:48 pm »


here's when i did mine. like any painting work it's time consuming to get right but it still looks good today... the thread turned into a sheared stud removal debate for while but essentially it's engine painting.
http://foc-u.co.uk/index.php/topic,12585.msg141399.html#msg141399
is it clean enough?

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #8 on: 10 May 2015, 05:21:23 pm »
WOW.....nice work BLUDCLOT  :thumbup.......mines not going to be that good, its in a far, far worse state than yours  :o

done a bit more this weekend, blasted the three covers , generator, timing and clutch.off the bike on friday, got rid of all the flaky paint sanded down too a smooth finish and are ready for painting, gunked the front of the engine and then I noticed the cam covers looking a bit rough.so...next job is to remove the AIS.had a look but cant see the best way to get it off so just about to sit down and ask mr haynes.......not taken the oil cooler off yet, so thats a job for one evening in the week, all being well I'll be painting next weekend....oh.need to remove the front engine mount crossmember and give that the same treatment.......very time consuming job, but will be worth it in the end  :)
One, is never going to be enough.....

fireblake

  • GP Hero
  • ******
  • Posts: 1,489
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: engine re-paint, silver
« Reply #9 on: 10 May 2015, 10:33:34 pm »
My engine is paint is appalling. I'm too scared to remove the exhaust in case anything breaks/snaps.  Maybe I'll grow a pair and do it soon
Sent from my villa in the South of France.


red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #10 on: 11 May 2015, 06:50:07 am »
 :lol :lol ...yep,know what you mean fireblake  :rolleyes ...theres a couple of fittings i would like to remove,offered up the socket but they aint budging......think i`ll mask them  ;) ........crank case covers were the worse,everyone mentioned it when looking at the bike,ive blasted these and given them a good sanding,not too bothered about the front of the enging,just a little tidy up really....
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #11 on: 12 May 2015, 08:13:03 pm »
AIS off tonight....so,did mr yamaha start with the AIS and build the bike around it....bloody thing.might look at a removal kit as dont fancy re-fitting the thing.......time for a beer me thinks. ;)
« Last Edit: 28 May 2015, 06:54:28 am by red98 »
One, is never going to be enough.....

unfazed

  • GP Hero
  • ******
  • Posts: 5,309
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: engine re-paint, silver
« Reply #12 on: 12 May 2015, 08:17:03 pm »
Red, my AIS is much cleaner than that one, do you to buy it?  :lol It would look nice on the newly painted engine  :lol

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #13 on: 12 May 2015, 08:20:56 pm »
I think ones enough unfazed  :rolleyes :lol....does that mean you've fitted a removal kit ?
One, is never going to be enough.....

unfazed

  • GP Hero
  • ******
  • Posts: 5,309
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: engine re-paint, silver
« Reply #14 on: 12 May 2015, 10:21:54 pm »
Yes, when I put it back together after checking the valve clearances, changing the plugs and replacing the downpipes. (full stainless OEM ones)

I used the Holeshot kit which is run by Dale Walker , great guy to deal with.

There is no drilling or tapping with his kit  http://www.holeshot.com//imgsrv/w_640/fz1/fz1_ais_cap.jpg

http://www.holeshot.com/

http://www.holeshot.com/fz1/ais_removal_kit.html


red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #15 on: 13 May 2015, 06:43:43 am »
great link...thank you UNFAZED  :thumbup .........looks better with the AIS out of the way and plenty of room to remove plugs and cam cover.......not my intention to spend money on extras for this bike,i bought it to ride it.think i may make an exception here though  ;) 
One, is never going to be enough.....

unfazed

  • GP Hero
  • ******
  • Posts: 5,309
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: engine re-paint, silver
« Reply #16 on: 13 May 2015, 07:23:54 am »
The only reason I did it was to make it easier to service.  :)

Hedgetrimmer

  • GP Hero
  • ******
  • Posts: 5,711
  • FOC-U official topiary expert
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: engine re-paint, silver
« Reply #17 on: 13 May 2015, 08:32:34 am »
Paul, you should have bought one of the later model bikes with the black engine finish, like I did  ;)

unfazed

  • GP Hero
  • ******
  • Posts: 5,309
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: engine re-paint, silver
« Reply #18 on: 13 May 2015, 08:34:59 am »
Paul, you should have bought one of the later model bikes with the black engine finish, like I did  ;)

Did you purchase? :eek

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #19 on: 13 May 2015, 08:37:55 pm »
Paul, you should have bought one of the later model bikes with the black engine finish, like I did  ;)







Come on then nick, what you got............
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #20 on: 13 May 2015, 08:41:22 pm »
Bit more progress this evening.removed front engine mount, oil cooler and cam cover.......next job is to mask everything and start prepping the surface... :)
« Last Edit: 13 May 2015, 08:43:21 pm by red98 »
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #21 on: 14 May 2015, 07:51:50 pm »
 Sanded the cam cover today, just needs a rub over with some panel wipe and then all 4 covers will be ready for paint, just about to order new gaskets, was going to start masking tonight but its been a long day at work today and tomorrows going to be worse  :\......roll on the weekend   ;)
« Last Edit: 14 May 2015, 07:53:10 pm by red98 »
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: engine re-paint, silver
« Reply #22 on: 14 May 2015, 09:19:42 pm »
Ordered clutch and alternator cover gaskets,£11.33 delivered, wemoto,.....cant find timing cover gasket though, started another thread for that  ;)
One, is never going to be enough.....

bludclot

  • WSB Pack Hound
  • *****
  • Posts: 539
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: engine re-paint, silver
« Reply #23 on: 15 May 2015, 07:32:38 am »


looking good red!
is it clean enough?

Andy FZS

  • GP Hero
  • ******
  • Posts: 1,137
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: engine re-paint, silver
« Reply #24 on: 15 May 2015, 11:06:06 am »
When I removed my timing cover to fit an ignition advancer I just used a small amount of gasket paste when I refitted it.