Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Kenbob on 14 July 2017, 05:28:21 pm
-
are renthal 758s ok to use on the 600, I have a spare set well, going spare really.
-
Yeah, work fine. Bit wider, and you'll need different bar ends. Got pair on mine at mo, you need to get them at right angle so they don't clash with fairing/mirrors or tank, but no big deal. The width took a bit to get used to and can be a bit of stretch for full lock.
Some pics on my blog here:
http://www.beginnerbiker.com/2015/06/renthal-758-ultra-handlebars-review/ (http://www.beginnerbiker.com/2015/06/renthal-758-ultra-handlebars-review/)
-
Cheers, will get hem swapped over.
-
And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.
-
More than ok, I put a set on my Fazer 600 and haven't regretted it since, feels so much more comfortable now :)
-
And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.
Yeah, I filed off the location tabs then used 3 or 4 layers of silver foil between the switch gear and the bars, nothing's moved in 4 years. I didn't fancy drilling holes in mine.
-
I don't know where all this talk of holes is coming from? :rollin I didn't have to drill a single hole in mine when I put them on
-
So much better than the standard bars. I filed down the tabs a bit and they've been fine =)
Chris