|
4 Exspose 5mm of bare wire on each strand and solder but do not solder Orange wire
|
|
|
|
|
IMG 3221
Heres my baby
|
|
|
|
Scrambler fazer
Scrambler by BF motorcycles
|
FZS600 Renntec grab handle with rack
Came off my 2003 Fox eye but compatible with all ones. In good nick, comes with 4 screws and 4 aluminium spacers.
About £95 new, will take £50 + postage.
|
10 Do not over do it with the rubber & electrical tape
|
quick snap to introduce my bike
|
|
|
|
WP 000636
Here is my new bike, just bought last week.
|
|
9 Now take small peice of rubber tape and gently stretch it then wrap round soldered wiring tightly Then wrap in eletrical tape
|
1067
Mar 10, 2013
|
|
|
6 Remove front screan and side fairing Main fairing can stay on (fox Eye) Pull rubber protector to expose connector to instrument pannel It takes some wiggling to get off while releasing push in lock
|
|
|
|
8 I used pegs to splitt my sourced wiring and at the same time it protects all the wires your not working on
|
pictures of my gen 1 thou
Just a couple of pics for your viewing pleasure.
|
7 Removed electrical tape to expose wiring My wiring all had green bands on them that I took as a factory Identification for the year 2003 I also used light brown as Live feed
|