Date: 18-04-24  Time: 09:05 am
« previous next »
Pages: [1]

Author Topic: Fazer 1000 exup  (Read 745 times)

Dave1000

  • Cager in Training
  • Posts: 1
    • Main bike:
      I don't own a bike
    • View Profile
Fazer 1000 exup
« on: 27 September 2020, 03:52:26 pm »
Help took off exup valve and the bush is solid in the exup casing tryed taping it but won't budge any ideas  :rollin thanks !!
Logged

Falcon 269

  • GP Hero
  • ******
  • Posts: 5,899
    • Main bike:
      FZS 1000 Gen1
    • - Yamaha R1 1999
    • View Profile
Re: Fazer 1000 exup
« Reply #1 on: 28 September 2020, 07:27:52 am »
Hi and welcome. :)

Which bush is stuck?  The one inside the EXUP housing at the far end of the valve, or the bush that fits in the EXUP cover?

In either case, provided that the valve spindle rotates freely in the bush without excessive freeplay, it's not matter for concern.  Just slather it in copper grease when you reassemble it and call it good.
Logged

teecee90

  • Weekend Warrior
  • ***
  • Posts: 237
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Fazer 1000 exup
« Reply #2 on: 29 September 2020, 04:15:10 pm »
If the bush needs replacing (as mine did), lots of heat is required. I used a mapp gas blow torch.

Logged
FZS 1000 Gen1 (2003)
Tiger 900 GT Pro (2020)
Pages: [1]
« previous next »