Date: 16-04-24  Time: 19:40 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hopefiendboy

Pages: 1 [2] 3
26
FZS600 Fazer / Re: cafe racer project
« on: 24 July 2018, 04:31:01 pm »
liking your work!!

27
For Sale & Wanted / Re: Mint Condition FZS1000 rear shock for sale
« on: 22 June 2018, 10:16:48 pm »
Now sold

28
FZS600 Fazer / Re: WeMoto Engine Bar Advice
« on: 22 June 2018, 09:56:16 am »
Did you get it sorted Jeff?

29

Due to a change in plan, I have a mint condition FZS1000 rear shock for sale- bought off Pete from here- just want what I paid for it back so £50 posted would be grand. Based in Edinburgh if collecting. Cheers!!


Here is the original advert:


  • Original FZS1000 rear shock for sale from a 2002 bike (will fit 2001 to 2005 models) The shock was removed at about 7500 miles and replaced with a Nitron shock (the Nitron shock was an improvement on the original but at over £400 it should have been!)
    The shock is in excellent condition with no corrosion and has been sat at the back of my garage boxed up for years. Looking for £45 if collected from Stafford area (ST19 post code area) For an extra £10 will post it to mainland UK - Cheers Pete



30
FZS600 Fazer / Re: WeMoto Engine Bar Advice
« on: 11 June 2018, 10:25:19 pm »
That looks about right Jeff. When I got them they didnt come with the instructions- just an image. This chap also has them fitted:


http://foc-u.co.uk/index.php?action=profile;u=1838;area=showposts


Failing that email Wemoto or Fehling for the schematics-I'm sure they will help out!!

31
For Sale & Wanted / Re: Cheap fazer 600 FS liverpool
« on: 07 June 2018, 09:00:58 am »
Did you ever sell the r6 shock? cheers

33
Still available?


Have also sent an email through.


Cheers


Hi yes still available- not had a message yet. you can send a message via the forum here!


Ta

34
For Sale & Wanted / Re: Arai visors and scotoiler
« on: 14 May 2018, 01:33:35 pm »
Would be interested in the scottoilers if you could post fella!

35
For sale brand new unused Motea engine bars for FZS600 1998-2003 £60 posted These ones http://www.wemoto.com/bikes/yamaha/fzs_600_fazer/98-99/picture/engine_bars_-_black/ Also will chuck in a free unused hiflo air filter for the same bike fitment after I discovered my bike has a k&n filter in it already! worth £15

37
Bearing condition on the rear suspension rocker? thanks!

38
FZS600 Fazer / Re: Engine bars/guard
« on: 26 April 2018, 02:08:48 pm »
Hi all


Recently just fixed up my FZS600 after coming off it about a month ago (minor damage) however both times I've come off it the crankcase cover seems to take the most damage. I've been debating on getting a set of Engine bars to go around the engine because if I come off it again I don't mind having to fork out for new bars, I'm just getting tired of having to find more crankcase covers  :lol .


My question is what are the best ones to get in everyone's opinion? Anyone have any recommendations? I'm not interested in crash protectors bar that goes through the bike with rubber bits either side, would definitely only be interested in the actual bar cages looking things to go round the engine.


Hope one of you can help like you always do.


Thanks in advance  :D



Did you have crash bungs fitted?

39
FZS600 Fazer / Re: Spot lights
« on: 26 April 2018, 01:56:03 pm »
LED or standard bulb?

40
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 24 April 2018, 10:32:27 pm »
Fitted my renthal ultralows on. Wow what a difference. Hugger and FZ1 rear shock next...

41
FZS600 Fazer / Re: % Brighter Bulbs
« on: 19 April 2018, 04:40:56 pm »
If anyone has a link to some LED Cree lights they would recommend that would be superb! I was considering getting these ones:


https://www.amazon.co.uk/gp/product/B01K19J0SM/ref=ox_sc_act_title_1?smid=A2ZE2RPWV4P8G4&psc=1


Handily they come with a switch.


My plan was to have a relay linked to the front sidelight and wire a feed directly through the battery through this to the LEDs along with an inline fuse to make sure I couldnt run the battery flat when not switched on and also to give me independent control of the lights.


I will be mounting them to crash bars that sit a bit lower on the bike- pics to follow when I get round to it.

42
FZS600 Fazer / Re: Panniers for a 98 fazer
« on: 19 April 2018, 02:52:38 pm »
Just advertised my set of Kappa side hard case pannier bags and mounting rack suitable for the FZS600 1998-2003! See on for sale forum or message me if interested!

43
For Sale & Wanted / Re: WTD- rear grab handle for FZS600 2000
« on: 19 April 2018, 02:17:33 pm »
All sorted now- thanks for the replies!

45
Hi


Finally got my new bike!!! Yay! It came with some hard luggage and mounts which I will not need so putting these up for sale to fund general maintenance and suspension mods.


Genuine KAPPA left and right hard case panniers along with all mounts. The brackets show points of surface rusting in places but a quick rub down and spray would do the job- they are not heavily corroded. The system is very neat and mounts/dismounts in a very slick fashion-I was impressed. Both cases are lockable and come with 2 spare keys matching lock barrels (ie same key does both cases). Take up to 10KG max each according to the label. If I have time I will prep these brackets etc so that the rust is treated.


The previous owner also had the top box, the bracket mount has fixings for a plate for this but this has been lost/misplaced, but means in future you could add to this set up.


£80 pounds, a bit more for postage. Based in Edinburgh.


46
For Sale & Wanted / Re: Original FZS1000 rear shock FOR SALE
« on: 12 April 2018, 11:36:59 pm »
As in I'll take it :-)

47
For Sale & Wanted / Re: Original FZS1000 rear shock FOR SALE
« on: 12 April 2018, 11:24:30 pm »
Have sent you a mail!

48
Hi All


Looking at options to replace the coolant hoses on the new to me bike. I searched and saw a thread about a group buy but i think it fell through. Has anyone come across any reasonably priced radiator hoses to suit? My soon to be bike is a 2000 FZS600 SP


Cheers in advance!

49
FZS600 Fazer / Re: New inlet rubber for the carburetors
« on: 12 April 2018, 01:17:47 pm »
Also received mine the other day- brass inserts all glued in nice and firmly. Just need to pick the bike up now  :'( :b

50
FZS600 Fazer / Re: touring fairing
« on: 10 April 2018, 01:04:49 pm »
Interested in this also- it's a toss up between a taller touring type screen or a double bubble one.

Pages: 1 [2] 3