Date: 17-06-19  Time: 08:34 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Dinger1962

Pages: [1] 2 3
1
FZS600 Fazer / None fazer Question (xj900f Igniter box)
« on: 15 May 2019, 07:21:17 PM »
Hi  fellas n burds recently bought an xj900f to have a bit of a project to go at got it running last night then promptly burned out the igniter box (feckin melted) do any of you guys have any expierience of this before or any idea what may be the cause of this thanks in advance any ideas /info greatfully recieved cheers

2
For Sale & Wanted / FZ6 fazer (2006)standard screen for sale
« on: 13 May 2019, 07:22:43 PM »
tidy clear un marked no cracks or damage £35.00 posted uk mainland only thanks

3
FZS600 Fazer / Rear brake caliper bleed ??
« on: 31 March 2019, 11:13:31 AM »
Morning foccers my rear brake was feeling a little spongey so decided to bleed it (simple enough i hear you mutter under your breath --Well here goes) one side bleeds nice and clean no probs  however the other side producing more air than Piers morgan with absolutely no sign of clearing --My thought was bleed nipple anyone come across this before an how did you resolve it --thanks for any input --20 minute job now into hour 2-- :o

4
FZS600 Fazer / Tyre questions
« on: 21 March 2019, 11:08:05 PM »
Standard tyre on the fzs seems to be 160/------can i fit a 180/  safely to a standard rim-- thanks

5
AS above clean useable screen no damage or scratches ----brand new bellypan no packaging --£35.00 each posted thanks--

6
as above does anyone have good  one spare for sale please thanks stu--

7
FZS600 Fazer / Chain sag ??
« on: 16 March 2019, 07:38:44 PM »
Hi guys been getting bike ready for mot when i noticed that when i pull rear wheel towards the chain side of bike my chain starts to sag  now my question is ---is this normal or do my swingarm bearings need replaced as this looks to be where the play is ?--Thanks for any info /advice-

8
For Sale & Wanted / RE: coolant hose SORTED NOW THANKS-----
« on: 08 March 2019, 10:00:16 PM »
does anyone have a coolant hose that runs from the filler cap to the cylinder head at the rear for sale please --

9
General / Re: fzs600 carb T piece
« on: 03 March 2019, 06:58:05 PM »
Alright chaps whats the plastic fuel inlet "T" piece in the middle of the carbs called as i managed to snap it off  has anyone got one spare i could buy thanks in advance stu

10
General / Daft flywheel question ??
« on: 22 February 2019, 07:10:09 PM »
Does the flywheel run in oil or is it in a dry space ? thanks for looking ---

11
FZS600 Fazer / 600 to 1000cc engine swap ??
« on: 03 February 2019, 09:11:24 PM »
Hi guys got this idea runnin round my head ---is it possible to fit a 1000cc lump into my 99 boxeye --anyone tried it or done it any info /advice welcome thanks in advance--

12
As above need head with cams and valves complete please thanks--

13
came off a 2002 bike --£75.00 or swap for cylinder head n cams for the same thanks--

14
General / FZS600 Engine daft question ??
« on: 20 January 2019, 03:28:01 PM »
Do the 2000 onwards engines fit the boxeye thanks ---- are they the same ?

15
As above anything considered i can arrange collection must be good runner otherwise mot fail/accident damage /past its best what have you got cheers in advance stu--

16
FZS600 Fazer / rattle in clutch basket when hot
« on: 16 February 2018, 09:14:17 PM »
Hi fellas should i just change basket or change clutch/bearing bush etc --never done one before but cant be that hard any tips or advice greatfully accepted --oh this is a 72 000 mile bike ??

17
For Sale & Wanted / Wanted fzs600 clutch basket
« on: 16 February 2018, 09:06:20 PM »
Hi ive got a rattling clutch basket when bike gets hot need a replacement please--

18
FZS600 Fazer / FAZER/THUNDERCAT FORKS ??
« on: 21 November 2017, 07:40:34 PM »
Nuther daft question as i dont have my fzs600 anymore to compare --recently aquired a yzf600 tcat forks arent great so looking to change --do the fzs600 forks fit the tcat as cat ones are few and far between thanks--

19
General / DAFT QUESTION TIME .
« on: 16 November 2017, 04:42:41 PM »
hi chaps i am picking up a yzf thundercat tomorrow to use as a winter hack is there anther site simillar (unofficial) to this one for the cat as this is most helpfull bike forum i know thanks --

20
For Sale & Wanted / Hagon rear shock FZS600
« on: 30 July 2017, 03:24:12 PM »
Complete Hagon shock serial no 62046 900-48 04-07cj--damper not working properly can be re furbed-spring useable to upgrade something else maybe? i was thinking £25 plus postage??

21
As per above need the nylon insert with two lugs on please bit of a long shot but worth a try thanks-

22
FZ6 / Fazer / Drilling out exhaust ?
« on: 25 July 2017, 07:33:27 PM »
Hi chaps recently became proud owner of a 2006 fz6 so far have put set of pirelli corsa diablos/renthal bars/puig double bubble black screen jus lovin it.My question is havin looked on youtube and seen how to drill out rear collector box does this not affect mapping /breathing for bike and has anyone tried it oh and does it improve performance cheers Stu 8) 

23
For Sale & Wanted / Wanted double bubble screen 2006 fz6
« on: 06 June 2017, 08:11:25 PM »
looking for db screen for the above thanks--Stu

24
FZ6 / Fazer / Double Bubble Screens (where to buy ???)
« on: 06 June 2017, 08:02:02 PM »
Been looking on ebay for a db screen puig seems to be most common but all sellers are abroad .Has anyone had any dealings with any of these companys or sourced one in the uk -just not too happy to send 80 quid abroad any suggestions welcome thanks--Stu

25
FZ6 / Fazer / Ignition barrel sticky
« on: 28 May 2017, 09:23:58 PM »
Just aquired my first fz6 2006 model and its great but the ignition barrel is sticky .I thought i could live with it but its getting on my tits now.I have cleaned and oiled as best i can but still no improvement.my question is can i buy a replacement barrel and key or do i need matching cdi etc .Any advice welcome cheers --

Pages: [1] 2 3