Date: 13-12-17  Time: 11:15 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jeffco

Pages: [1]
1
Fazer 1000/FZ1 corner / Exup valve spacer
« on: 08 July 2016, 01:28:00 PM »
Hello
Im trying to get a replacement for the spacer that goes on the inside of the exup blade where it goes into the hole at the back, I have just rang my local Yam dealer  £32 + vat...whaaaaaaat!!!! for a spacer!. If you bought all the parts of yam dealers to build a bike it would cost millions.  so if anyone has one to sell or knows a cheaper outlet I would be grateful to hear of it.  The bike starts and runs fine without it, I just don't know if it would do any long term damage to the valve.

2
Fazer 1000/FZ1 corner / Occasional problem changing gear
« on: 04 August 2015, 08:00:46 PM »
For a while now I seem to have a problem changing down gears if I have brought the bike to a stop without down changing as I slowed, when im stopped and I try to change down it will go down to about 3rd them wont go further without a bit of jiggling about. Other than that the gearbox is fine, no missed/ sticky  gears  and changes down fine if I change down as im slowing. Is this a common problem? or are dark clouds forming on my horizon ?   You can tell that ive just had a week in Scotland , still looking for bloody dark clouds...
 

3
For Sale & Wanted / FOR SALE Dreamscreen tall dark tint windscreen
« on: 10 March 2014, 09:32:00 PM »
ANYONE LOOKING FOR A NEW SCREEN. used once, tried it out on Sunday but all round I think ill stick to my Powerbronze D/B. These are on ebay for £60 + £4 p+p....Im looking for £40 including p+p    a bargain.

4
Fazer 1000/FZ1 corner / Scotland
« on: 05 July 2013, 06:19:14 PM »
Just returned (Wednesday) from 5 days in beautiful Scotland...I say beautiful because I remember it from last time, it was too  cloudy and wet to see much this time. If it wasn't raining it was going to not to mention the gale force winds fu*k me its July. When is Jamie Oliver gonna do Scotland ...deep fried everything,  and to top it off I just about managed to beat my speeding ticket home and find out then that the kilted chappies don't do the "naughty boy class" so its £60 and 3 points................Think I will try August next year  :lol

5
Fazer 1000/FZ1 corner / Braided Brake Lines
« on: 17 December 2012, 06:32:01 PM »
Being one of this sites more mechanically inept users I am confused by the 2 or 3 front brake line issue and would appreciate some explanation also to change the rear brake or not ? as it seems not everyone does.

6
Fazer 1000/FZ1 corner / Braided Brake Lines
« on: 17 December 2012, 06:09:59 PM »
As one of the sites more mechanically inept users I am confused by the 2or 3 front brake line subject when changing to Braided hoses....explanations,sugjestions and best/cheapest place to buy would be greatly appreciated.Also is it worth changing the rear or not?

7
For Sale & Wanted / fzs1 rear shock
« on: 20 August 2012, 07:06:12 PM »
I am considering getting an r6 shock and am feeling out if anyone would be interested in my old one, Ive had it refurbed and a hyperpro spring put in about 3000 miles ago cost of £180  which was a big improvement but am curious about the r6 so.....
Ive seen them on ebay advertised by breakers, out of an 04(same) totally standard no stated mileage for £75-£100

8
Fazer 1000/FZ1 corner / Exup tale of woe
« on: 07 August 2012, 06:55:20 PM »
Due to me getting the 7g error message I decided to service my exup at the weekend and it looks like ive f*cked it up , when Id fitted it I turned the ignition on,no probs so I went for a ride a few miles down the road the 7g error comes up again , went home stripped it down and refit a couple of times to no avail.
When its all fitted it rotates so far then tightens up and on inspection when I held a straight edge to it its got a slight bevel from the back side bending up. I went to the Yam dealers in Chorley and spoke to a mechanic he told me if its bent its goosed throw it away,then said my best option was to throw it away take the cables of and seal the hole with a bolt,job done. I said as far as I was aware this would have an averse effect on the bikes performance he shrugged and said my options were all expensive.
Rang another dealer just to price a new valve £282+ vat   Shit !  Any advice or better still reasonably priced spare valves would be most welcome

9
Fazer 1000/FZ1 corner / Bar Risers
« on: 27 May 2012, 09:35:35 PM »
Could one of you gents tell me the hight of the standard bar risers,after trying and failing several times to get a screen that im happy with f*ckwit that I am ive just came to the conclusion that the previous owner may have fitter higher risers :o

10
Fazer 1000/FZ1 corner / SEAT
« on: 17 October 2011, 08:30:16 PM »
Just google Tony Archer Huddersfield ;)

11
Fazer 1000/FZ1 corner / Shoei Quest
« on: 01 October 2011, 07:00:46 PM »
Hi All
I have just bought a Shoei Quest lid a few weeks ago,I had a Raid2 which fit me realy well but was noisy.After reading so many reviews saying the quest was 60% quieter I got one,it definatly feels more aerodynamic,but 60 % quieter its not! :\

Pages: [1]