Bikes, Hints'n'Tips > FZS600 Fazer
2002 Fazer dash lights reset when switching headlight to full beam
nickf:
Hi, I am getting back to the Fazer now after a few years of working on my Gpz. One problem it has always had is that when the headlights are on & you switch to full beam or press the passing button, the lcd on the dash goes off for a second then all lights flash as though the ignition has been just turned on. So far I have wiggled all of the connectors, tested the 2 headlight relays as per the Haynes manual and they seem good. The bulbs are the correct wattage. The other thing that is strange is if I unplug 1 bulb then it is fine, doesn’t matter which side I undo. Has anyone had this problem before or got any ideas as to what I can check next? Nick.
BBROWN1664:
Sounds like it could be an earthing issue
nickf:
...thanks, I’ll get the manual out & look for earths on the wiring diagram.
BBROWN1664:
Check the connectors in the black box under the tank.
nickf:
....yes I wiggled them, but will have a better look & see if there is any corrosion. I think I may have missed one on the left hand side of the fairing.
Navigation
[0] Message Index
[#] Next page
Go to full version