Date: 28-03-24  Time: 13:53 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Andy-Fazer-thou

Pages: [1] 2
1
For Sale & Wanted / Fazer Manual for sale
« on: 17 April 2015, 12:02:03 pm »
I Have a Fazer 1000 haynes manual for sale £10 + postage
any one interested ???
Thank you

2
Fazer 1000/FZ1 corner / Re: R6 Can & Link For a Fazer 1000
« on: 12 December 2014, 12:48:39 pm »
Because i got mates rates on the pipe and thought i may be able to modify it to fit
if not swap it for one that will. because ppl ask stupid prices for 2nd hand aftermarket cans
simple as that bit ov wheelin & dealin :)

3
Fazer 1000/FZ1 corner / R6 Can & Link For a Fazer 1000
« on: 11 December 2014, 03:24:16 pm »
Hi All
Ive just bought a carbon can with link pipe for an R6
what will i need to do to fit it to my fazer 1000 i have original pipe on the fazer and dont really want to chop it up..
If it wont fit without too much trouble is there any one who would want to swap it for 1 that will fit my fazer i will send pics if required ill try put 1 up

thanks alot

merry christmas all















4
For Sale & Wanted / Re: My Fazer 1000 up for sale £1500
« on: 22 October 2014, 08:10:07 pm »
Cmon all you fazer lovers


5
For Sale & Wanted / Re: Wanted: Fazer 1000 !
« on: 08 October 2014, 07:16:47 pm »
Hi If your still looking ive advertised it on gumtree heres the link
theres also a video on the advert 
http://www.gumtree.com/p/yamaha-motorbikes/2002-yamaha-fazer-1000/1083658022

thanks alot




6
For Sale & Wanted / Hi Wanted Please
« on: 27 September 2014, 07:26:19 pm »
Hi as any one got
either a pair or right side (as u sit on the bike)
the inserts that go inside the fairing nose cone
as cheap as poss please

thanks

7
For Sale & Wanted / Re: gen1 for sale
« on: 13 September 2014, 03:23:30 pm »
Its a nightmare been trying to sell mine for only 1600 and ppl still want it cheaper
takes the piss as bike stands me at well over 2500 and all the work done in the last year
so disheartining such good bikes

8
For Sale & Wanted / Re: My Fazer 1000 up for sale £1500
« on: 08 September 2014, 06:21:26 pm »
k

9
For Sale & Wanted / Re: A dilema with my bike i want to sell her
« on: 07 September 2014, 08:20:58 pm »
Well Now shes defo gotta go
i really thought id get more but
£1500 rides it away just put 1yr MOT so mot till september 2015


10
For Sale & Wanted / Re: A dilema with my bike i want to sell her
« on: 23 August 2014, 11:39:00 am »
Hmmm
i want 1700 for her no offers under that
its defo worth that kinda money all day long & thats from a Yam main dealer for a private sale
so if any one wants her £1700 is the rock bottom price

thanks all for your advice & wisdom

:)



11
For Sale & Wanted / Re: A dilema with my bike i want to sell her
« on: 17 August 2014, 10:09:15 am »
No I dont want another Gen 1 i want a Gen 2

12
For Sale & Wanted / Re: A dilema with my bike i want to sell her
« on: 15 August 2014, 06:38:24 pm »
Thanks for all the great advice
I really do like my Fazer and shes an ace conmuter for work (34miles a day)
i have thought about breaking it for spares but itd be such a shame as otherwise its a good bike
i dont think im ready to bite the bullet with her yet though. I hear what your all saying about price
£1500  :groan wow gutted i thought realistically id get £1700 for her
Ill have to have a serious think now

Thanks Alot again





13
For Sale & Wanted / My Fazer 1000 up for sale £1500
« on: 14 August 2014, 07:48:06 pm »
HI Everyone

Right My Fazer is in very good condition and clean Lots of recent work clutch & springs, battery, new rear tyre, chain & sprockets, Brakes, fork seals, service including carb balance, powder coated wheels, belly pan, , tinted screen,  MOT september 2015 no tax as of new law
 the bike has 64k on it And still bombing along as strong as it was the day it was made  the engine thats in it is excellent it dont smoke knock or rattle or bang.
heres a Link to my Fazer on you tube
 
Fazer in the garden 2


Andy

NO OFFERS i want £1500 for it and thats VERY cheap considering ive seen 2 others on auto trader with similar mileage for 2700+

 

14
For Sale & Wanted / Putting My Fazer 1000 up for sale
« on: 13 July 2014, 03:12:49 pm »
Here i have my very nice 2002  Fazer 1000 in the best colour (IMO)
 Lots of recent work clutch & springs, battery, chain & sprockets, Brakes, fork seals, service including carb balance, powder coated wheels, belly pan, heated grips, tinted screen, Brand new maxxis supermaxx rear tyre fitted 03/07/14 Good front tyre, runs very well i really like this bike but ive now had it a year so want a change.
 the bike has 62k on it but with engine technology nowadays this is not high mileage
Bike located in Lincoln, Lincolnshire
 
 my bike runs and rides excellent no smoke knocks or bangs
 I ride this bike everyday to work & back with no trouble whatsoever (40 miles)
 taxed till october 2014 tested september 2014
 Link to my Fazer on you tube
Lookin For Reasonable offers aroud £1900
the rear tyre in the video is no longer on the bike ive had a new 1 fitted since video was shot
 
Fazer in the garden 2

15
For Sale & Wanted / Re: few bits for sale gen 1 fazer 1000
« on: 03 July 2014, 10:41:43 am »
hi
did you sort out that left side fairing insert for me i sent you my address & email for pay pal

thx

Andy

17
Hi
sorry Already in talks about them ill update after the weekend
thanks alot

Hi
Thanks for the interest in my forks and brakes both are now sold
thx Ayjay great to meet you
all the best

18
Hi
I have a full set of brake discs for a fazer 1000 2 x front & 1 x rear in good usable condition
and also a set of standard fork legs which have had new Seals, Slide & guide bearings and dust covers
Not mint but are still in very good usable condition with no major marks pits or holes
Id prefer collection as both items will cost a fair bit to post but can post if buyer pays postage
im in lincoln
im open to offers but not letting them go for peanuts 8)

im also looking for a nice aftermarket can & link pipe for my fazer 1000 gen 1
Not Overly loud as have elderly neighbours

19
Nice one for that info
i have bought some bushes and taking it to a different mechanic as lost trust in the one i been using for the last 2yrs
had to take my bike back a 2nd time on a few occasions coz they didnt do the job right in the 1st place.
so even if i asked them about the bushes they wouldnt have a clue.
so going to try a repair again then if its any more trouble ill get a leg for it

thanks alot



20
Niether pitted or scratched
nor bent dont understand why but works for a few days prob a week then i start noticing it leaking again
bike shop done the work & they dont know either



21
Help Desperate need of a Left (as you sit on the bike) Fork Leg willing to buy a pair
Ive had 3 oil seals put into my forks in the last 5 weeks and the left side is always dripping and leaking
its been done at a bike shop the right leg is fine no trouble but the left leg is being a pain in the arse




Thank you
please help some one i gotta get my baby 100% again

22
Fazer 1000/FZ1 corner / Re: Rev Counter 7k is it exup ????
« on: 11 May 2014, 03:33:10 pm »
Thankyou very much ill get new innards as ive noticed 1 is frayed

Thanksagain

23
Fazer 1000/FZ1 corner / Rev Counter 7k is it exup ????
« on: 11 May 2014, 01:41:30 pm »
Hi Everyone
I have a bike i actually enjoying riding an 02 Fazer thou i have had her nearly a year now and she has 60k on the clock but she has been riding so well i have really gone to town on it since ive had her new chain & sprokets, both tyres, battery, centre stand, fork seals, carbs balanced, serviced, new ignition, clutch, wheels powder coated & belly pan just whats bin done so far, I really thought id got it sorted but now a new problem has raised its head when i start it up in the morn my rev counter shoots to 7k back to 0 it does it a few times then stops and is ok, ive checked on the forum and everything seems to point to the exup valve, but nothing about it doing it now and again just permantly So i checked the valve on the exhaust and it moves free and is well lubricated so i dont think its the actual valve so just wondered what else could it be, I am mechanically minded so if its not too big a job id attempt myself,
Any advice would be appreciated

thanks

Andy

24
For Sale & Wanted / Re: Gen 1 fazer 1000 wanted
« on: 05 May 2014, 12:05:44 am »
Are you still looking
mines up for 1900 if you interested

02 gen 1

25
For Sale & Wanted / Re: WANTED - FZS1000
« on: 06 April 2014, 07:41:46 pm »
My 02 fazer
if your interested

Pages: [1] 2