Date: 19-04-24  Time: 09:26 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - thom_1991

Pages: [1]
1
Snip!

Items gone

2
For Sale & Wanted / 2000 Yamaha Fazer 600
« on: 26 October 2012, 06:31:10 pm »
Year 2000 Yamaha Fazer 600 for sale. Generally decent condition, fork bottoms a bit tatty, mechanically brilliant. Located in Buckingham. Approximately 26,000 miles. 9,000 of which have been covered by myself over the last year and a half. In that time I have;

Changed the oil and filter 3 times.

Fitted a K&N air filter and NGK iridium spark plugs.

Balanced the carbs twice and reset the Throttle Position Sensor.

Fitted Goldspot calipers on the front as the standard bluespots were looking tired.

Zx6r front master cylinder with EBC HH pads and braided hoses all round.

Fazer 1000 bluespot rear caliper (the standard 600 one always seizes without fail)

3.5" front wheel allowing 120 rather than the standard 110 size tyres to be fitted, giving a much larger choice of rubber

New this year Stainless Motad Venom headers (the standard 600 ones always Rot without fail)

New rear Michelin Pilot Power, the front is still good with about 3mm left in the middle and a little more on the edges.

New head and rear wheel bearings along with seals.

New chain and sprockets fitted this year along with the updated front sprocket nut (the standard one isn't man enough and usually ends up lunching the gearbox output shaft if not replaced)

Scottoiler so the new chain and sprockets will last for ages with minimal maintenance

Taxed till the end of November, and test till May next year.

Looking for £1300 ono

If I get the asking price I will also include the standard bars complete with heated grips ready to plug in for the nasty weather and
the standard footrests.

Many other bits I'd be willing to part with for a little extra:

Seat cowl

Nitron race shock (choice of springs!)

K-tech linear 0.85kg/mm fork springs

Spare fairing

Standard 3" front wheel with 110 Pilot Power














3
For Sale & Wanted / Stubby can and link pipe Fzs600s
« on: 22 May 2012, 07:40:46 pm »
eBay ad here. 50mm slip on and link pipe for 98-03 Fazer 600 but can would obviously fit other bikes though link pipe probably wouldn't be suitable.







4
FZS600 Fazer / Fazer 600 raced at the tt
« on: 14 March 2012, 09:31:31 pm »
Found a thread on the old forum here http://fazerowners.yuku.com/topic/8503#.T2EO3la0O9o but all the links seem to be dead. Anyone got any more info or better pics.

5
FZS600 Fazer / Bearings
« on: 08 March 2012, 03:46:47 pm »
In need of new head and rear wheel bearings for an Fzs 600. Doing a search on here i found that "bike bearings" site someone suggested for the thou but they don't list head bearings for the 600.... From wemoto i'm looking at about £50 all in if anyone could help me better that or has any exerience of the quality of them etc

Cheers

6
FZS600 Fazer / Uk Euro headlight First Gen Fzs
« on: 20 January 2012, 07:01:05 pm »
Right can anyone tell me how to identify a Uk spec from a euro spec headlight unit on the early shape Fzs600. Is the difference only in the reflectors inside or are the bulbs at different sides?

On main beam mine lights up the rh/side of the road as opposed to going off to the left as it should. Run the chassis number through at a Yamaha dealers and apparently it's a Norwegian bike. Bought a headlight unit checked with the seller it's from a uk bike which i was told it is. Looked today and i can't see any different markings from the one in my bike at the moment, the bulbs are the same way around although the right hand bulb on mine says Germany at it's base where the voltage and wattage is printed and the new one says France. The one marking i haven't found is the part number given in the part's catalogue i downloaded from here. Every other component in the headlight has only part number except the whole unit which has number 5DM-84310-00-00 or 5DM-84310-10-00. Help!

Pages: [1]