This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Ben600
1
« on: 27 April 2014, 08:50:06 pm »
Right, I want shot of the Fazer now! So any offers on the remaining bits? If not , eBay it will be! It's in the way in my garage now!
2
« on: 26 April 2014, 08:58:10 pm »
Got the round black bit, but the cable is cut. all other parts of it damaged -------------------------------------------------------------------------------------------------------------------------------------------- I also have a very good condition seat for the FZS600 , with only a couple of marks on the bottom edge (about 2mm - not visible at all on bike) also, a really good cond. front red mudguard and still got the bank of carbs (less TPS) engine swingarm and all associated bits tanks / frame rubbers various fixings etc
3
« on: 24 April 2014, 10:31:14 pm »
PM sent
4
« on: 19 April 2014, 09:20:02 pm »
r wheel gone front brakes gone rear brake gone
std exhaust silencer still here. engine sill here carbs still here (minus tps) rear shock / swingarm assembly all here
5
« on: 18 April 2014, 09:59:31 am »
Oh, Ok thanks for that The can is 60mm , will fit the 600 with a shim (I made one upto see) Cheers, Ben
6
« on: 17 April 2014, 09:20:31 pm »
Hi all,
Up for sale is my carbon Micron can and link pipe, I bought by mistake thinking it'd fit my Ducati - it doesn't
It is to fit 1998-2001 Yamaha R1 , but from what I understand, should also fit the FZS1000 (please confirm yourself if it's going on one of those)
There are a few scratches, but nothing serious... I might split if the price is right?
Looking for £55 posted o.n.o
Cheers!
Ben
7
« on: 04 April 2014, 09:09:09 pm »
Edit : silencer available. PM'd re calipers
8
« on: 30 March 2014, 12:41:21 am »
if you have pics and b1k3rdude doesn't want the can, I'm interested. that way it is mutually beneficial for us both?
9
« on: 29 March 2014, 02:01:30 pm »
is an FZS600 one the same or similar? if so I have one.
10
« on: 27 March 2014, 08:33:12 pm »
Pm'd re carbs
Headers and silencer gone.
11
« on: 26 March 2014, 07:43:52 pm »
Top Yoke - provisionally gone Clocks -provisionally gone I will try and strip the swingarm and rear shock this weekend and provide more detailed pics The engine is still available - if you can collect make me an offer -literally any offer considered - The clutch is damaged (one of the posts that the springs sit over is broken) and the oil pump cover is sold. also the rocker cover has a little damage mainly where the dummy cam covers mount. over than that, it turns over and did run up until I stripped it Cheers! Ben
12
« on: 26 March 2014, 07:34:03 am »
exhaust - gone
swingarm hose guides - gone
Still plenty left to go around - any offers considered (as long as they don't take the p1$$) as I really want gone now.
13
« on: 25 March 2014, 10:44:47 pm »
I still have it all pm'd
14
« on: 25 March 2014, 12:58:25 pm »
PM'd RE exhaust. Speedo sender - I have it, but the cable is severed about 20cm from it (result of a full frontal crash and being sent up and over a van!) It might be of use, if so let me know
15
« on: 24 March 2014, 01:20:38 pm »
Oil pump cover sold from engine.
Also have top yoke and ignition barrel / key up for sale, as I've no use for it.
16
« on: 22 March 2014, 09:06:58 pm »
Pm'd you mate
17
« on: 22 March 2014, 07:25:41 pm »
The cover... The swingarm tc, Ill inspect tomorrow and give you a price. really, open to whatever offers for it. I'll look into postage too
18
« on: 21 March 2014, 07:31:29 pm »
I do have it I'll try and get pics tomorrow for you
19
« on: 19 March 2014, 06:41:43 pm »
As promised. The small scratch is nowhere near as large as it looks in the pics and is easily touched in. I would be more than happy to do that for whoever wants it. It still has the gasket in the end too, which ideally could be replaced, but is still good if you just want to throw it on and forget.
20
« on: 19 March 2014, 12:48:43 pm »
Like I said, pics will be up this evening I completely forgot about the exhaust silencer
21
« on: 18 March 2014, 07:33:35 pm »
Exhaust - there are pictures of the headers - I was gutted to seee the small holes after being left in the garage Silencer, I really must apologise, I completely forgot to take a pic. I assure you it is in mint condition (I got the bike, and it cam straight off upon arrival at home) I will get a pic tomorrow evening The rack, make me an offer I cannot refuse! The box is in good condition, though being totally honest, I will have to try and find the key. I know I paid £80 for the rack, but in all honesty I'm not overly sure what it's worth. Hope this is OK guys, Ben
22
« on: 17 March 2014, 08:48:33 pm »
If location wasn't an issue (Im in cambridgeshire) I'd go and get it. Ive a good engine, but the frame etc is fooked
23
« on: 17 March 2014, 08:14:43 pm »
http://s1311.photobucket.com/user/Ben_Hagerty/library/Fazer%20bitsThis is the album the Fazer parts are in - please ignore any Husky and Ducati pics! Also, please note. the crap pics of swingarm and front end - anything you see or want, ask / make an offer. I've got pretty much everything of the bike still.
24
« on: 17 March 2014, 08:13:30 pm »
25
« on: 15 March 2014, 11:14:19 pm »
Hi,
I've a standard exhaust from my FZS600 up for grabs or swaps. I'd be happy with around £30+ p&p (about £6) as it is in great condition.
I'll try and get pictures up as soon as I get a moment.
Cheers!
Ben
|