Date: 23-10-18  Time: 03:53 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Doggy

Pages: [1] 2 3
1
For Sale & Wanted / FZS600 a couple of bits - all gone now thanks
« on: 21 March 2017, 03:18:21 PM »
Hi

I have a pair of rear footrests, with the rubber covers on.
A pair of R&G bar end weights in perfect condition.

Pick up from Watton Norfolk.

Any one interested before I bung them on flea bay?

PM if you are

Doggy

2
For Sale & Wanted / 1998 FZS600 Fazer now sold
« on: 23 August 2016, 07:09:08 PM »
Hi All

My fazer has to go!

1998 with 39,000 miles on the clock.

Good bits:
Starts on the button. 12 months mot, stainless down pipes into standard can. New fairing. Rear tyre getting low. Recent chain and sprockets.

Bad bits:
Usual timing chain rustle when cold - goes away once hot.
Couple of small dents in the tank.

Looking for £795 ovno.

Doggy
pm me any questions.

Thanks

3
For Sale & Wanted / Re: For Sale - FZS600 Boxeye accessories
« on: 18 August 2016, 04:49:48 PM »
Pictures as requested.

4
For Sale & Wanted / Re: For Sale - FZS600 Boxeye accessories
« on: 18 August 2016, 09:28:50 AM »
Hi

Yes all still for sale - will take some pics and put them up this afternoon.

Cheers

Doggy

5
For Sale & Wanted / Now sold FZS600 Boxeye accessories
« on: 17 August 2016, 02:25:54 PM »
Hi Guys and Gals

My Fazer is up for sale so I have some parts for sale:

Stainless Radiator Guard and 4 stainless allen screws ( only on the bike a few months so as new). £30.00 + p&p

R&G Bar end weights fitted for a month  - £15.00 inc p&p

Pillion comfort set - Later Seat in perfect condition (16mm higher on pillion section) and later rear peg set (rubber covered pegs and lower and further forward) bolt straight on. Wifey says a lot better than standard set up. £60.00 + p&p

PM me for more info.

Thanks 

Doggy

6
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 21 March 2016, 12:09:05 PM »
I have heard that before, funnily enough only from people with silver ones!

More stainless bits and bob's are on the list and stainless brake hoses.

Cheers

Doggy

7
Actually got the old girl out on the road today, thoroughly enjoyed a good, if chilly towards the end, 60 mile run to actually enjoy the fruits of my hard work.

Loved it!

First picture is her when I bought her, second one as she looks today.

Still got things to do, mainly cosmetic and a service.

Cheers Doggy

8
FZS600 Fazer / Re: FZS600 problems getting bike on center stand.
« on: 29 February 2016, 10:37:15 AM »
I started to notice it was more awkward than usual, then coming up to a roundabout the stand fell in half and made a scrapping sound from hell.

On inspection the spring eye on the main stand had rusted away completely!

Second hand stand from here, rub down & hammerite and fitted sorted the problem - now the easiest bike I have ever owned to put on the main stand.

Doggy

9
FZS600 Fazer / Re: Givi pannier kit for 1998 FZS600
« on: 26 February 2016, 09:41:56 AM »
It is up on fleabay so cannot offer it up, but had my concerns.

The fact that it looks different to yours has put me off investing £100 in it.

Thanks for the advice guys, you have possibly saved me from wasting my hard earned.

Cheers
Doggy

10
FZS600 Fazer / Givi pannier kit for 1998 FZS600
« on: 25 February 2016, 05:19:21 PM »
Hi Guys

Does this look right for a 1998 FZS600?

I would have thought to fit panniers the indicators would have to be moved - am I right or wrong?

Thanks in advance

11
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 25 February 2016, 04:53:25 PM »
Your right - how silly of me I should know better.

So pictures of fairing, stickers and black mirror caps and chrome handle bar clamp caps as requested.

Doggy.

12
FZS600 Fazer / Re: What have you done to your FZS600 bike today
« on: 20 February 2016, 07:47:59 AM »
Finished off fitting the new fairing and put the graphics on.

A good mate made the graphics for me, not completely identical to original but as I am restoring the old girl, only get her back to clean original-ish condition they look great.

Also put some black plastic caps on the mirror stalk nuts just to tidy the inside up.

Very pleased.

Doggy

13
For Sale & Wanted / Re: Wanted - Givi Monokey rack set 1998 Boxeye
« on: 20 January 2016, 09:46:09 AM »
Hi
Thanks for looking and the kind offer, but I will pass as not complete.

Thanks again

Doggy

14
For Sale & Wanted / Re: Wanted - Givi Monokey rack set 1998 Boxeye
« on: 18 January 2016, 05:47:15 PM »
Hi Mate

I can't believe the would be different - has it got the fittings with it?

Any chance of a picture?

Best Regards

Doggy

15
For Sale & Wanted / Re: Wanted - Givi Monokey rack set 1998 Boxeye
« on: 13 January 2016, 04:30:38 PM »
thanks for looking, but I am after something cheaper.

Doggy

16
FZS600 Fazer / Re: Wanted - Givi Monokey rack set
« on: 11 January 2016, 10:58:56 AM »
Hi

 Many thanks for the heads-up, I thought I had but obviously didn't!

Doggy

17
For Sale & Wanted / Wanted - Givi Monokey rack set 1998 Boxeye
« on: 11 January 2016, 10:57:48 AM »
Hi Guys and Gals

I am looking for a Givi Monkey rack set for my 1998 FZS600 Boxeye.


Any one got one that they are looking to sell?

Cheers

Doggy :)

18
FZS600 Fazer / Wanted - Givi Monokey rack set
« on: 10 January 2016, 08:05:42 PM »
Hi Guys and Gals

I am looking for a Givi Monkey rack set for my 1998 FZS600 Boxeye.


Any one got one that they are looking to sell?

Cheers

Doggy :)

19
FZS600 Fazer / Re: 1998 Boxeye Front indicator mounting plate
« on: 21 December 2015, 12:09:47 PM »
IF ONLY I HAD THE SKILL AND EQUIPMENT.

20
FZS600 Fazer / Re: 1998 Boxeye Front indicator mounting plate
« on: 18 December 2015, 03:15:56 PM »
Gave up searching, and ordered a new one at £15.98!

It's a lot but I am not going to bodge things back on once I have taken them off, and a new fairing is worth the new bits to bolt in on correctly in my book.

Doggy

21
FZS600 Fazer / Re: 1998 Boxeye Front indicator mounting plate
« on: 12 December 2015, 11:10:05 AM »
Hi

No it is missing - the indicator was always a bit loose but could only see what was wrong when I took them off.

But thanks for the advice.

Doggy

22
FZS600 Fazer / 1998 Boxeye Front indicator mounting plate
« on: 11 December 2015, 03:51:24 PM »
Hi All

Just received my new fairing, having stripped the old one off (in three pieces) I find that I am missing a front indicator mounting plate (photo attached). :'(

Does anyone got one sculling about they don't need?

Happy to pay postage etc.

Thanks

Doggy :'(

23
FZS600 Fazer / Re: headlights.... leds,halogens,hids,projectors etc ect
« on: 09 November 2015, 10:46:21 AM »
I had the same problem with my 96 TDM850.

HIDS4U supplied a complete kit for the dip beam which was a 20 minute job to fit and made a huge difference.

I did not fit a HID kit to the main beam as there is a slight delay in getting full power from the lamps, instead went for a night breaker bulb which made a bit of difference but lasted 20 miles!

Hope this helps

Doggy

24
FZS600 Fazer / Re: 1998 Boxeye caliper bolts
« on: 11 October 2015, 03:08:06 PM »
Thanks guys.

Doggy

25
FZS600 Fazer / 1998 Boxeye caliper bolts
« on: 08 October 2015, 07:08:19 PM »
Hi All

I am looking to change my grotty caliper bolts for Stainless or Titanium.

Looking on fleabay, they list them from 2003 on.

Is there a difference in the bolts by year or are they all the same?

Confused of Norfolk.

Pages: [1] 2 3