Date: 22-04-18  Time: 09:53 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Mustang

Pages: [1]
anyone have a set of decent used discs for sale?

Fazer 1000/FZ1 corner / Power commander 3 not working
« on: 15 March 2018, 05:54:50 PM »
does anyone on here have any experience with these? Just got one for my FZ1, connected up to laptop to check what map was in it but won’t communicate as it needs external power. so I took sellers word that the map is off a FZ1 and an Akro can, can’t do any harm . Wired it up to the bike and fitted the o2 eliminator plug, bike won’t start. Just cranks, pc leds flash then go off. Tried to connect to the laptop with it on the bike, won’t communicate.
Have connected 9v battery to pc3 and tried to communicate with laptop, no deal.

Am at al loss really as it’s plug n play and the seller assures me it was fully working.

Seller is from Stoke way so fairly local, I’ve asked him if he can help.

In the meantime can anyone else help?

Fazer 1000/FZ1 corner / FZ1 chain adjusters
« on: 13 February 2018, 09:20:40 PM »
Just swopped my back tyre on my gen 2 and the swing arm is sort of open inside, not a fully welded closed up box. The chain adjuster bolts are completely exposed to the elements behind the swing arm . My bike is
LOw miles and looks like very dry ones so they were in good nick . I've coated them up in copper grease now. Just thought I'd mention it if other gen 2 riders are bothered.

For Sale & Wanted / Wanted - Gen 1 thou a Ivans jet kit
« on: 05 February 2018, 04:31:41 PM »
Anyone got one for sale?

Fazer 1000/FZ1 corner / Winter maintenance time
« on: 09 January 2018, 05:50:01 PM »
Decided it starts today , list of jobs: remove AIS, check valve clearances, remove carbs and airbox, remove exhaust and paint engine, replace carb to head rubbers, balance carbs.

So far I've followed the guides on pats page, dropped the coolant - it was just rusty water no antifreeze, removed the AIS and tapped the exhaust ports. That was a pig of a job with such restricted space, I feared my tap was going to snap but I managed it in the end and cut down some M8 cap screws to 10mm to go in.

Front of the engine is filthy so I'm soaking the exhaust nuts overnight as they will have to come off for access.

Does anyone have a blanking cap for the airbox I could buy?

Events, Meets, Ride outs etc / Donington 18th September with Stalker
« on: 17 September 2017, 06:16:28 PM »
im taking the FZ1 on this tomorrow picked up a place in novice for a ton.

Anyone else here on the trackday.

Fazer 1000/FZ1 corner / Just got an FZ1 to go with the FZS 1000
« on: 15 September 2017, 04:35:33 PM »
Wow its quick and the front suspension works well.

Had to fit a screen though as it was tearing my arms off the bars and my helmet off above 100.

Its great now but over 115 the screen starts to vibrate!

Fazer 1000/FZ1 corner / Fork springs
« on: 29 July 2017, 12:06:05 AM »

All recommend progressive for the road and linear for the track - makes sense

Are these springs all of good quality and relatively equal?

For Sale & Wanted / Fazer 1000 gen 1 for sale
« on: 24 July 2017, 11:04:23 PM »

Bike Make : Yamaha
Bike Model : FZS 1000
Year : 2001
Price : £1900

Mileage : clocks 51 but bikes done 25 ish, mots to prove it
Colour : Black
Extras : R6 Shock mod. Remus can. Tall screen.
Overall Bike Condition : Good
Tyre/Chain/Sprocket Condition : Tyres good, chain n sprockets new
Service History/Receipts/Recent Service work : some. Done by me.
Fork oil n seals just done. New battery, rear fender, clutch cable, fuel filter, oil n filter in February.
Bike Location : Midlands
Any Other Relevant Info : was cat C in 2004. Clip on screen, fancy seat, heated grips, scottoiler not included.
Contact details: 07770581335
 (add photos too..)  Need cash for deposit on new bike so this is up for sale.

Fazer 1000/FZ1 corner / Headstock adjustment
« on: 02 June 2017, 02:05:49 PM »
I have the factory manual download and it's not clear to me how this is done. On my other bikes it was loosen lower fork clamp bolts then tighten up basically pulling the lower fork clamp up towards the top yoke.

Is it the same? Cos the manual isn't clear at all.

Fazer 1000/FZ1 corner / Live wire
« on: 21 May 2017, 08:55:55 PM »
I was changing my rear fender for a new one from Fowlers and I noticed a bolt sticking out the rear bodywork on the LHS. I was horrified to find this unisulated bolt wired direct to the live terminal of the bike! Why the food would someone do this? It was obviously thought about as they had wound a piece of 2.5mm red insulate ire round the live terminal and taped it up. Anyway it's off before it had a chance to short the battery out.  New fender in so the battery has somewhere to sit securely at last. I'm slowly getting the bike back to standard.

The battery was originally wedged in with rags and both terminals were insulated with children's shoe insoles ffs.

For Sale & Wanted / Wanted baglux cover
« on: 20 May 2017, 09:27:20 PM »
im looking for a bagster tank cover for a Fazer 1000. I have a black bike so ideally a dark one.

Fazer 1000/FZ1 corner / whatsbthe rad hoses that are plugged ?
« on: 11 May 2017, 07:15:32 PM »
on each side at a the top there are short hoses both are plugged

Fazer 1000/FZ1 corner / Chain adjuster found snapped and bodged
« on: 10 May 2017, 09:58:49 PM »
come to change the rear tyre and a PO has fitted stainless bolts without coppers lip and its snapped on them. So what did they do? Left the stud, put a nut on it then screwed a short bolt in it! You can't adjust the chain!

So I need someone to remove the broken stud for me. As I don't have a welder.

Introduction / Back
« on: 09 May 2017, 07:22:45 PM »
Used to have an FZ6 1st big bike about 7 years ago. Now got an FAzer 1000.

It's rough in places but seems to go ok.

I'm in Lichfield Staffordshire if anyone is near me and knows the bikes let me know I could do with some advice.

Pages: [1]