This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Doggy
1
« on: 21 March 2017, 03:18:21 pm »
Hi
I have a pair of rear footrests, with the rubber covers on.
A pair of R&G bar end weights in perfect condition.
Pick up from Watton Norfolk.
Any one interested before I bung them on flea bay?
PM if you are
Doggy
2
« on: 23 August 2016, 07:09:08 pm »
Hi All
My fazer has to go!
1998 with 39,000 miles on the clock.
Good bits:
Starts on the button. 12 months mot, stainless down pipes into standard can. New fairing. Rear tyre getting low. Recent chain and sprockets.
Bad bits:
Usual timing chain rustle when cold - goes away once hot.
Couple of small dents in the tank.
Looking for £795 ovno.
Doggy
pm me any questions.
Thanks
3
« on: 18 August 2016, 04:49:48 pm »
Pictures as requested.
4
« on: 18 August 2016, 09:28:50 am »
Hi
Yes all still for sale - will take some pics and put them up this afternoon.
Cheers
Doggy
5
« on: 17 August 2016, 02:25:54 pm »
Hi Guys and Gals
My Fazer is up for sale so I have some parts for sale:
Stainless Radiator Guard and 4 stainless allen screws ( only on the bike a few months so as new). £30.00 + p&p
R&G Bar end weights fitted for a month - £15.00 inc p&p
Pillion comfort set - Later Seat in perfect condition (16mm higher on pillion section) and later rear peg set (rubber covered pegs and lower and further forward) bolt straight on. Wifey says a lot better than standard set up. £60.00 + p&p
PM me for more info.
Thanks
Doggy
6
« on: 21 March 2016, 12:09:05 pm »
I have heard that before, funnily enough only from people with silver ones!
More stainless bits and bob's are on the list and stainless brake hoses.
Cheers
Doggy
7
« on: 03 March 2016, 04:10:36 pm »
Actually got the old girl out on the road today, thoroughly enjoyed a good, if chilly towards the end, 60 mile run to actually enjoy the fruits of my hard work.
Loved it!
First picture is her when I bought her, second one as she looks today.
Still got things to do, mainly cosmetic and a service.
Cheers Doggy
8
« on: 29 February 2016, 10:37:15 am »
I started to notice it was more awkward than usual, then coming up to a roundabout the stand fell in half and made a scrapping sound from hell.
On inspection the spring eye on the main stand had rusted away completely!
Second hand stand from here, rub down & hammerite and fitted sorted the problem - now the easiest bike I have ever owned to put on the main stand.
Doggy
9
« on: 26 February 2016, 09:41:56 am »
It is up on fleabay so cannot offer it up, but had my concerns.
The fact that it looks different to yours has put me off investing £100 in it.
Thanks for the advice guys, you have possibly saved me from wasting my hard earned.
Cheers
Doggy
10
« on: 25 February 2016, 05:19:21 pm »
Hi Guys
Does this look right for a 1998 FZS600?
I would have thought to fit panniers the indicators would have to be moved - am I right or wrong?
Thanks in advance
11
« on: 25 February 2016, 04:53:25 pm »
Your right - how silly of me I should know better.
So pictures of fairing, stickers and black mirror caps and chrome handle bar clamp caps as requested.
Doggy.
12
« on: 20 February 2016, 07:47:59 am »
Finished off fitting the new fairing and put the graphics on.
A good mate made the graphics for me, not completely identical to original but as I am restoring the old girl, only get her back to clean original-ish condition they look great.
Also put some black plastic caps on the mirror stalk nuts just to tidy the inside up.
Very pleased.
Doggy
13
« on: 20 January 2016, 09:46:09 am »
Hi
Thanks for looking and the kind offer, but I will pass as not complete.
Thanks again
Doggy
14
« on: 18 January 2016, 05:47:15 pm »
Hi Mate
I can't believe the would be different - has it got the fittings with it?
Any chance of a picture?
Best Regards
Doggy
15
« on: 13 January 2016, 04:30:38 pm »
thanks for looking, but I am after something cheaper.
Doggy
16
« on: 11 January 2016, 10:58:56 am »
Hi
Many thanks for the heads-up, I thought I had but obviously didn't!
Doggy
17
« on: 11 January 2016, 10:57:48 am »
Hi Guys and Gals I am looking for a Givi Monkey rack set for my 1998 FZS600 Boxeye. Any one got one that they are looking to sell? Cheers Doggy 
18
« on: 10 January 2016, 08:05:42 pm »
Hi Guys and Gals I am looking for a Givi Monkey rack set for my 1998 FZS600 Boxeye. Any one got one that they are looking to sell? Cheers Doggy
19
« on: 21 December 2015, 12:09:47 pm »
IF ONLY I HAD THE SKILL AND EQUIPMENT.
20
« on: 18 December 2015, 03:15:56 pm »
Gave up searching, and ordered a new one at £15.98!
It's a lot but I am not going to bodge things back on once I have taken them off, and a new fairing is worth the new bits to bolt in on correctly in my book.
Doggy
21
« on: 12 December 2015, 11:10:05 am »
Hi
No it is missing - the indicator was always a bit loose but could only see what was wrong when I took them off.
But thanks for the advice.
Doggy
22
« on: 11 December 2015, 03:51:24 pm »
Hi All Just received my new fairing, having stripped the old one off (in three pieces) I find that I am missing a front indicator mounting plate (photo attached).  Does anyone got one sculling about they don't need? Happy to pay postage etc. Thanks Doggy
23
« on: 09 November 2015, 10:46:21 am »
I had the same problem with my 96 TDM850.
HIDS4U supplied a complete kit for the dip beam which was a 20 minute job to fit and made a huge difference.
I did not fit a HID kit to the main beam as there is a slight delay in getting full power from the lamps, instead went for a night breaker bulb which made a bit of difference but lasted 20 miles!
Hope this helps
Doggy
24
« on: 11 October 2015, 03:08:06 pm »
Thanks guys.
Doggy
25
« on: 08 October 2015, 07:08:19 pm »
Hi All
I am looking to change my grotty caliper bolts for Stainless or Titanium.
Looking on fleabay, they list them from 2003 on.
Is there a difference in the bolts by year or are they all the same?
Confused of Norfolk.
|
Show Posts