Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: davec on 22 January 2012, 02:00:28 pm
-
Any ideas on the best place to get Stainless nuts and bolts from?
-
ebay type in fzs600 probolt there's loads of stuff and different colours :)
-
If it's just engine and other non stressed areas you want the bolts for look on ebay for bolts by the bag you can get 100's for the price of 20 from Probolt, they are very very expensive try these: -
http://www.ebay.co.uk/itm/370287148580?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 (http://www.ebay.co.uk/itm/370287148580?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)
http://www.a2stainless.co.uk/Japanese_B2142Y.aspx (http://www.a2stainless.co.uk/Japanese_B2142Y.aspx)
https://secure.hosts.co.uk/~custom-fasteners.co.uk/acatalog/Fasteners.html (https://secure.hosts.co.uk/~custom-fasteners.co.uk/acatalog/Fasteners.html)
If you want stressed area bolts/nuts i.e. caliper mounting, fork pinch bolts then you need to ensure you get thr correct grade of SS.
-
Thanks for your replys.I am looking for rear caliper torque arm bolts and rear caliper bolts so they are going to be stressed. What would you recommend as a good stress grade stainless steel?Thanks.
-
Look at other suppliers such as Namricks. Do a search on the internet there are loads around. Pro-Bolt is very top end stuff. A4 is the best grade, A2 is harder but not as corrosion resistant. A4 bolts should be fine for what you want them for, and A2 as well.
-
Thanks again,info much appreciated.
-
I've used this company a few times over the years for stainless bits & always found them reasonably priced with good quality & service - http://www.inoxbolt.co.uk/ (http://www.inoxbolt.co.uk/)
-
http://www.shinybikesyndrome.co.uk/cms/index.php/our-products/pro-bolt-tasty-nuts (http://www.shinybikesyndrome.co.uk/cms/index.php/our-products/pro-bolt-tasty-nuts)
Check out Nooj who is a member on this site, this is his website, I'm sure he gets a certain percentage off pro-bolt.
-
Can any one tell me the bot size for the handlebars for my fzs 600 98 thanks as these are staring to rustand would like to get some stainless ones thanks :)
-
:\ any one give me what size I need please
-
:\ any one give me what size I need please
8M about 50mm long off the top of my head.
-
The four cap head screws for the handlebar clamps are M8 x 30mm long. (FZS600)
i.e. 30mm from under the head to the end of the screw.
-
The four cap head screws for the handlebar clamps are M8 x 30mm long. (FZS600)
i.e. 30mm from under the head to the end of the screw.
:) thank you just order some stainless steel ,marine grade them buggers not rust [/b] :rollin
-
Got Titanium set of nuts and bolts from Probolt.