This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - chris.biker
26
« on: 29 March 2017, 09:33:45 pm »
If the down pipes are still good and strong I would look at cutting out the balance tubes and welding in a new bit of tube.
27
« on: 22 January 2017, 09:37:00 pm »
You could cut through the remains of the foot peg at the front of the mounting point, having done that cut down through the remains of the peg and through the mounting pin. Do this twice as close the the mounting bracket. Not the clearest description but I hope you get the idea.
28
« on: 21 December 2016, 10:41:39 pm »
When I used to go to work every day on the bike, traffic upsets would happen. My response to them changed after it occurred to me that every day i was travelling with the same cars around me. My thoughts went on the lines of one day a car cuts me up and I respond, great, but what about the days to follow, if you have upset a real nutter you could fine out how vulnerable motorcyclists are.
29
« on: 15 December 2016, 10:43:52 pm »
What great thinking, there is a twat driving right up your rear end on a motorway at I guess 70 Mph and you wish to dazzle then or distract them. Best of luck with that idea.
I always pull out of their way and let them pass.
30
« on: 29 October 2016, 10:46:15 am »
So is Tapatalk away of access the forum from a mobile phone?
31
« on: 23 October 2016, 09:53:53 pm »
Hope the stuff is not asbestos.
32
« on: 30 September 2016, 05:39:30 pm »
sounds (+ looks) good 
could have saved some money and just done a Hartside Weekend
And Hartside has proper Yorkshire cuppa tea available at the top.
33
« on: 30 September 2016, 05:36:54 pm »
I would inspect the plates for wear and if they are with in the limits I would clean them with brake and clutch cleaner and a light rub over if fine emery paper. I will wait to hear what others think to this.
34
« on: 25 September 2016, 07:34:08 pm »
Hammerite.
35
« on: 26 June 2016, 05:34:43 pm »
I like it.
36
« on: 14 June 2016, 07:19:18 pm »
give it a light patchy spray over with black. then repeat the rubbing down during this the black will high light any floors in the surface.
37
« on: 30 May 2016, 07:41:19 pm »
I'm back too. A great weekend as ever. Thank you Moff and all who make this a yearly high light.
38
« on: 24 May 2016, 09:53:21 pm »
I was really looking forward to meeting everybody. Unfortunately, I had an off last week and will not be recovered from the injuries. Broken rib, Bennett's fracture needing immediate surgery, contusions and badly swollen left leg, which gave the medics cause for concern. Surgeon told me that I may not regain sufficient movement to be able to ride again but we shall see. It won't be for lack of trying !
Fazer is battered and scraped. Someone picking it up this week to do an assessment.
Anyway, I'll be thinking of you all on the day.
Really sorry to hear about your accident Anquetil. Take it easy fella, wishing you a speedy recuperation.
As I could not put it better, as Celticdog say.
39
« on: 02 May 2016, 10:07:38 am »
I would be interested in attending a midlands gathering. I think a meeting point not on the biking scene is a better idea because as everyone arrives it is easy to know they are arriving for your event. It is harder for me as I ride a Honda, but with fazers being so popular the situation is valid.
40
« on: 26 April 2016, 08:02:47 pm »
Happy Birthday.
41
« on: 14 April 2016, 10:41:59 pm »
I had a what the f.. moment when I was planning my trip to France a couple of years back, but what I found was the helmet makers name (Lazer) was in reflective material and for filled the requirement.
42
« on: 08 April 2016, 11:59:09 pm »
Hi, I have other commitments on the Saturday so can not do the full weekend, but would I be alright to doss down possibly Saturday night, and definitely Sunday night. It would be nice to see the crowd as well as doing the great ride up to the event. If it is ok let me know what my share of the costs are for this. Cheers
43
« on: 06 April 2016, 10:14:20 pm »
I have always said ''If I have time to polish it, I have time to ride it. So I ride it''
44
« on: 29 February 2016, 10:35:05 pm »
A drop down / drawn bridge ramp the width of the door way would be good, in the up position it could be bolt at the two top corners and used to add security to the doors. Also with the floor possibly needing more strength to cope with the weight of the bike, putting extra boards down could be used to raise the floor to match the door jib, this would remove the bump as you push the bike out.
45
« on: 29 February 2016, 10:22:37 pm »
Or windscreen cleaner in yer feckin eyes...
This is the most common event, it would be interesting to see the CoSH details for the stuff.
46
« on: 14 February 2016, 09:44:03 pm »
Well there is still the Isle of Wight to Portsmouth hovercraft I have done that one it was fun.
47
« on: 10 February 2016, 10:21:56 pm »
I know Diesel has got cheaper! but i to throw it around like cheap aftershave is not funny. I hope you have the swiftest of recoveries and get back to biking soon.
48
« on: 19 January 2016, 10:32:45 pm »
Hope you get it sorted.
49
« on: 09 January 2016, 07:33:21 pm »
I can guess which way Slap is going to vote in the EU in or out referendum. 
50
« on: 08 January 2016, 11:06:19 pm »
I discovered this group the other day.
|
Show Posts
