Date: 28-03-24  Time: 21:13 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - cl1ve2004

Pages: [1] 2 3
1
For Sale & Wanted / Wanted fzs 600 rack
« on: 30 November 2023, 02:14:59 pm »
Wanted renntec or similar rack for 2003 fzs 600,
(Wanted to fit topbox) not worried about condition as I'll probably hammerite it anyway.
Cheers
Clive  :D

2
General / the fazers' got to go,what to get next ?
« on: 15 July 2021, 01:14:12 pm »
as per the title,my fzs 600 gotta go, so as the next bike will be the last before I hang up my helmet,want something comfy,but able to stick in the twisties with low helmet noise and decent wind protection..


Thinking about tracer 700,or Kawasaki versys 650 as brand new bikes,deffo not a Harley or cruiser type bike, nothing naked either...don't mind a decent used bike as long as it can do the above..


6 foot tall and 13 stone so not a racing snake !! :rolleyes


Any ideas welcome guys.


Clive

3
For Sale & Wanted / SORTED !!.. indicators wanted for fzs 600
« on: 10 November 2020, 10:10:38 am »
want to get rid of the mini indicators that came with the bike and put originals back on.


anyone got any O.E spares/for sale, at a reasonable cost ??


  SORTED NOW THANKS>> :rolleyes :rolleyes


cheers



4
FZS600 Fazer / Spark plug number 1 white tip??
« on: 26 August 2020, 12:56:06 pm »
Other 3 plugs look good but number 1 looks like tippex on centre electrode and running rich outside.. Any ideas??

5
FZS600 Fazer / Finally !!
« on: 17 August 2020, 01:10:05 pm »
The fazer is back on the road, and going like a fazer should and I'm like a dog with 2 dicks..


Had carbs on and off a few times, trying to sort out flat spot, getting annoyed,turns out it was the fuel pump all along.. :rolleyes


Thanks to all for their input,I have learned loads about the fuel system not scared of tackling any job on her now..


Juat gonna ride her everywhere and catch up on lost road craft.


What to do next ??? :rollin


Clive










6
FZS600 Fazer / fuel pump test ?
« on: 09 August 2020, 11:23:35 am »

My fuel pump runs for ages(and noisy)exactly 5 secs every time I turn on ignition, I thought once fuel is in bowls the pump wouldn't need to keep priming


itself every time.

I read on here to test fuel pump you can put a finger over the outlet of the pump and turn on ignition, see if pump stops or carries on (pressure check)..


Did that yesterday and pump keeps running (priming ?) for 5 sceonds with my finger on outlet ..(exactly same length of time as when I turn ignition on..)


Should it stop more or less straight away with my finger over it , or run for a few seconds before stopping ??


Cheers

7
For Sale & Wanted / fzs 600 fuel pump wanted
« on: 08 August 2020, 04:58:34 pm »
Anyone have one for sale ??


Cheers




8
FZS600 Fazer / should fuel filter be full ??
« on: 06 August 2020, 11:04:17 am »
I put a see through type fuel filter on my fazer, I can see the petrol squirting in but it's only half filled the filter, should it be full up


or is it a lazy fuel pump ??

 

9
FZS600 Fazer / mixture screw adjusting tool any recommendations ??
« on: 22 June 2020, 12:26:31 pm »
Thinking about buying one as space is bloomin tight on carb 3..


A few different ones on flea bay, anybody use one, or waste of time ??


10
For Sale & Wanted / wanted fzs 600 fork spacer and damper 2002 on..
« on: 15 June 2020, 11:26:09 am »
As said in subject, going to change forks back to standard as they've been modded  to take emulators.


Need the top spacer (183mm long) and damper.


Cheers


Cl1ve

11
FZS600 Fazer / Number 4 spark plug oily
« on: 07 June 2020, 05:25:46 pm »
Rebuilt carbs, new o rings, mixture screws etc..bench set butterflies and mixture screws.


Put the carbs back on, starts ok with no choke, did carb balance, all good...sounds a lot better,and goes better now, but stuttery at low end.


Took plugs out and 1,2,3 nice colour, but 4 has oil (not petrol) on electrode..


Checked the coils, coil leads and caps,swapped with some spares still the same result, oil on number 4 plug.


Any ideas, carbs again, or am I looking at valve seals ??


Cheers




12
FZS600 Fazer / quick carb question
« on: 05 October 2019, 03:21:18 pm »
Just refurbed carbs..new mixture screws in a couple o rings etc, and now resetting the mixture screws to 2 1/2 turns (003 model)..after setting to 2 1/2


turns,  carb number 1  has no part of the screw showing in the mouth of the carb but 2,3,and 4(tps side carb)have about 1mm sticking through


Should they all be protruding above the rim of the mouth of each carb, or is it normal that carb 1 screw is flush with the mouth of the carb ?


cheers


clive



13
FZS600 Fazer / main jet problem,am I being thick
« on: 12 June 2019, 10:57:38 am »
2003 carbs, stripped and cleaned 3 main jets have daylight through 'em,but main jet at the TPS side has no hole..


Not bunged up,but looks like it's never had a hole in it..


Am I being thick..probably, but need someone to tell me :rolleyes


Cheers Clive



14
FZS600 Fazer / can mixture screws be removed ??
« on: 03 June 2019, 04:01:45 pm »
Got my carbs off, and wondered if the mixture screws can be unscrewed for replacement as one is screw is deffo damaged and seized and don't wanna


budge..the other 3 are all moving so no grief there..

Cheers





15
General / Invisible man
« on: 05 May 2019, 04:05:31 pm »
Yet another 2 twats (at different mini roundabouts) who can't see me or my bike and nearly twat me off when I'm indicating and turning right..both women (I'm not a misogynist) therefore I didn't give chase and bollock' em..
My neighbour was behind me in his car on the second incident and came over to my gaff to say even he couldn't believe it !! :2guns

16
For Sale & Wanted / some fzs 600 fork innards wanted
« on: 14 April 2019, 04:11:31 pm »
anyone got 2 of the tubes that rest on the front fork spring kicking about ?


cheers


clive

17
Anyone know the correct length of the tube spacer ? I'm going to fit some different springs and need to know if they've been shortened..


Cheers


Clive

18
For Sale & Wanted / FZS 600 luggage rack
« on: 05 April 2019, 04:58:59 pm »
Anyone got a rack for sale?  8)


19
FZS600 Fazer / comfort seat
« on: 15 March 2019, 01:44:49 pm »
My old ass needs a better seat,keep getting pain in my right cheek and my back :'( any recommendations, The seat is 16 years old so choices either


reupholster or replace..unless you know better....don't mind someone building seat up as my feet easily touch the floor..


20
FZS600 Fazer / just found some spark plugs !!
« on: 23 February 2019, 12:29:06 pm »
came across 2 lots of plugs whilst clearing out garage


ngk cr9eix and ngk cr9ek both sets are in great nick ..question..can i use them on my fzs 600 ?


cheers


clive :smash


21
For Sale & Wanted / fzs 600 handlebars wanted
« on: 18 February 2019, 04:57:16 pm »
I Want to buy either fzs 1000 bars or a set of renthal 758, not too worried about condition( as long as their not bent)so if anyone has either for sale and 


price is right I'm interested.. :D

22
Fazer 1000/FZ1 corner / Jack up kit
« on: 24 March 2018, 11:31:33 am »
Going through my shed and found some jack up dog bones( still in packaging !!)for my fazer 600 that I got twatted off a few years back so never fitted



Will they will fit my 1000 ?? hole centres about 135mm..


Cheers


Clive





23
Fazer 1000/FZ1 corner / FZ1 screen for FZS 1000 ?
« on: 03 March 2018, 08:02:25 am »
Been trying to work out if an FZ1 screen can be adapted to fit FZS 1000...Anyone tried it ?? I'm on a mission...
 :b

24
Fazer8 / FZ8 / thinking about getting fz8 but what about wind blast ??
« on: 04 February 2018, 03:06:01 pm »
As per title thinking of buying an fz8 half faired ..but does anyone know ....is high speed wind blast better than my gen 1 fazer 1000?? I know it's


subjective,but just appreciate a few views from owners..





Cheers


Clive

25
For Sale & Wanted / fazer 1000 crash bars wanted
« on: 29 September 2017, 05:02:02 pm »
As it says :)   crash bars wanted even not best condition considered ...


Clive

Pages: [1] 2 3