Author Topic: FZS600 parts (Read 4359 times)

Ben600 · « **on:** 17 March 2013, 03:33:55 pm »

As my poor baby Fazer is a write off, I have a bunch of spares kicking around gathering dust. They were removed to make way for upgraded parts just weeks before the crash.
The parts are :
Standard Bars and / or bar weights
Front red mudguard ( drilled to accept a fender extender thing)
Standard steel pipes, a few rust spits but very good condition.
A rear panel in red, a few scuffs but a good replacement if yours is damaged.

I have no doubt got tonnes more but at the moment this is all I can find, I have a centre stand somewhere too.
Pictures to follow and any offers considered.
Collection preferred but I can arrange courier etc obviously.
Cheers all,
Ben

Ben600 · « **Reply #1 on:** 17 March 2013, 05:25:15 pm »

attached are the mudguard pics. the last being the tiny scuff to the front edge, which, when on the bike you literally cannot see

Ben600 · « **Reply #2 on:** 17 March 2013, 05:27:44 pm »

Attached are the photos of the panel, its a left side. It has two minor imperfections, one by the holes for the grab rail (see yellow circle) , which look to be from panniers rubbing, the second by the light which is a very minor scuff that has been touched in and is barely noticable

Ben600 · « **Reply #3 on:** 17 March 2013, 05:31:00 pm »

These are the centre stand pics...
on the whole it is very good condition, as you would expect some chips and minor rust marks due to its location on the bike. Mounting lugs are perfect and the spring will be supplied as in pics.
Took off the bike as it was heavy and in my young stupid mind, I thought it looked best without. It didnt, and was highly impractical without!

Ben600 · « **Reply #4 on:** 17 March 2013, 05:35:16 pm »

These are the handle bars.
Standard issue Fazer bars, with bar ends. Bars are perfectly straight and were removed because i wanted lower ones. Bar ends, one is scuffed. I did it moving the bike into the garage on the wall

the other is perfect.
I would be willing to sell complete or separately.

Make me an offer on the bits as a lot or individually, I don't mind. I amin Wisbech near Peterborough if you wanted to collect. or as previously said, I can post at your expense.
i'd be happy with cash or PayPal. PM me or reply on this thread to contact me, alternatively drop me a text :07585157885

regards,
Ben

Ben600 · « **Reply #5 on:** 17 March 2013, 09:15:55 pm »

sorry mate, the last spare can went on on my my Dukes.. and the Fazer's got trashed.. I have got a standard in the garage somewhere, and 2x aftermarket link pipes?

Ben600 · « **Reply #6 on:** 17 March 2013, 09:41:32 pm »

I Believe so mate, they carry the stop for the center stand, and I think it is a 52mm end for pretty much any can to fit. The two I have are identical, i bought one to experiment with but never got around to doing it.

The link pipe is as below (not mine, but exactly the same)

Skippernick · « **Reply #7 on:** 18 March 2013, 04:30:20 pm »

Can you put up a photo of the down pipes, might be interested.
Cheers
Nick

Ben600 · « **Reply #8 on:** 18 March 2013, 04:40:13 pm »

I will do as soon as I am home mate, away with buisiness today until tomorrow evening.

Ben600 · « **Reply #9 on:** 18 March 2013, 09:49:10 pm »

New they'r 45 quid, so i'd be happy to let one go for about 15quid with P&p...

Jacko · « **Reply #10 on:** 22 March 2013, 10:31:08 am »

What do you want for the stand inc postage please.
ta
Dave

Revilo18 · « **Reply #11 on:** 22 March 2013, 01:05:21 pm »

Have you got front right hand side footrest hanger?

Ben600 · « **Reply #12 on:** 22 March 2013, 06:31:31 pm »

Unfortunately the pegs were ruined

all these parts were removed before the crash...
As for the stand, I will get a quote for postage and get back to you later this evening

Jacko · « **Reply #13 on:** 23 March 2013, 01:13:08 pm »

Ben600 · « **Reply #14 on:** 23 March 2013, 03:58:48 pm »

I have PM'd you mate

Ben600 · « **Reply #15 on:** 26 March 2013, 10:46:46 pm »

Stand sold. Link pipe(s) sold. all remaining at the weekend will be bunged on ebay!

bm · « **Reply #16 on:** 27 March 2013, 02:38:43 pm »

is the mudguard still available?
have you the extender?
is there a metal underbrace?

Ben600 · « **Reply #17 on:** 27 March 2013, 04:04:06 pm »

Mudguard available,
I am unsure of the whereabouts of the extender, though I shall look tonight.
There wasn't an underbrace when it was removed., it mounts via 2 bolts either side
I removed it to fit a rather tasty Carbon one from a Ducati

Ton13 · « **Reply #18 on:** 12 April 2013, 10:50:38 pm »

hey! do you have the bolt plugs from the frame?!
its like a black cap that protects the bolt halfway up the frame??

Thanks!

Ton13 · « **Reply #19 on:** 12 April 2013, 10:52:12 pm »

ohhh... you got a gear changer lever too?