Date: 28-03-24  Time: 12:26 pm

Author Topic: what did you do with your fazer today ?  (Read 1585397 times)

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7975 on: 23 July 2019, 12:50:41 am »
Surely the blanket will get tangled in the chain  :lol :lol :lol






I trap it with my hot water bottle and some octopus straps. :lol
never look down on anyone unless you're helping them up.

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7976 on: 23 July 2019, 09:26:46 am »
Removed the rear wheel myself for the first time 😬😬
Had a new rear tyre to fit and was sick of paying the garage silly money to do it so figured it was about time I learnt to strip the wheel down myself.
Cleaned and regreased all the bearings, gave the swimgarm and chain a thorough deep clean, even degreased and polished my sprocket.

Also fitted the new air filter and gave the underside of the tank a quick wipe round and tidied up some of the wiring etc

All in all a productive (and rather bludy sweaty) few hours

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7977 on: 23 July 2019, 07:01:29 pm »
It can be a pig sometimes getting that caliper bracket with the slot in it right,I've found it easy sometimes and then a right swine the next. :evil
never look down on anyone unless you're helping them up.

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7978 on: 23 July 2019, 07:35:44 pm »
It can be a pig sometimes getting that caliper bracket with the slot in it right,I've found it easy sometimes and then a right swine the next. :evil

Yep that definitely resulted in some swear words. Seems like a silly idea to me, surely it would make more sense to bolt it on?

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7979 on: 24 July 2019, 12:33:10 am »
yeah,or at least design it in a way you don't have to hope it doesn't move while you're getting the wheel in without three hands. :lol
never look down on anyone unless you're helping them up.

fazersharp

  • GP Hero
  • ******
  • Posts: 6,915
  • 10 stone Racing Snake
    • Main bike:
      FZS600 98-99
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7980 on: 24 July 2019, 09:20:44 am »
yeah,or at least design it in a way you don't have to hope it doesn't move while you're getting the wheel in without three hands. :lol
I used a few pieces of thin wood to lift the wheel up to the exact height and just rolled the wheel into place. Still fiddly though. I wonder if that is why some people have found their spindle put in the wrong way around because that would make it a lot easier going through the bracket.
I don't do rain or threat there of. dry rider only with no shame.

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7981 on: 24 July 2019, 06:54:36 pm »
Took the old girl out for its MOT ...... A new set of rear indicators and a legal size plate later, she passed with flying colours.


Rode it down there in shorts and T shirt which is something I never do and although I felt very vulnerable, in this heat it felt fantastic and very liberating. 8)


So, from now on.......Real bikers wear shorts and T shirts.  :D :b




vinnyb

  • WSB Pack Hound
  • *****
  • Posts: 663
    • Main bike:
      FZS600 02-03
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7982 on: 24 July 2019, 07:50:34 pm »
Took the old girl out for its MOT ...... A new set of rear indicators and a legal size plate later, she passed with flying colours.


Rode it down there in shorts and T shirt which is something I never do and although I felt very vulnerable, in this heat it felt fantastic and very liberating. 8)


So, from now on.......Real bikers wear shorts and T shirts.  :D :b


  Light the blue touch paper and retire to a safe distance. :lol

agricola

  • GP Hero
  • ******
  • Posts: 1,042
  • Man on a mission
    • Main bike:
      FZ6 S2 07-09
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7983 on: 24 July 2019, 09:34:07 pm »
Up on the lift, and checked every fastener, chain, tyres, liquids, then to the filling station for some of JETS finest, Donington Park tomorrow evening for some track action

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7984 on: 25 July 2019, 12:36:51 am »
Up on the lift, and checked every fastener, chain, tyres, liquids, then to the filling station for some of JETS finest, Donington Park tomorrow evening for some track action




Pictures if possible. :thumbup
never look down on anyone unless you're helping them up.

agricola

  • GP Hero
  • ******
  • Posts: 1,042
  • Man on a mission
    • Main bike:
      FZ6 S2 07-09
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7985 on: 26 July 2019, 07:04:01 pm »
Up on the lift, and checked every fastener, chain, tyres, liquids, then to the filling station for some of JETS finest, Donington Park tomorrow evening for some track action




Pictures if possible. :thumbup


Does this work?


https://youtu.be/LVrLPIoL_Nc

slappy

  • GP Hero
  • ******
  • Posts: 1,797
    • Main bike:
      Other
    • - MT09
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7986 on: 26 July 2019, 10:06:09 pm »
Up on the lift, and checked every fastener, chain, tyres, liquids, then to the filling station for some of JETS finest, Donington Park tomorrow evening for some track action




Pictures if possible. :thumbup


Does this work?


https://youtu.be/LVrLPIoL_Nc


Yes, looking and sounding good :thumbup

agricola

  • GP Hero
  • ******
  • Posts: 1,042
  • Man on a mission
    • Main bike:
      FZ6 S2 07-09
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7987 on: 26 July 2019, 10:32:30 pm »
Just need a way to clean the inside of my leathers now, absolutlely soaked in sweat. Anyone any cleaning tips?

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7988 on: 26 July 2019, 11:18:03 pm »
Just need a way to clean the inside of my leathers now, absolutlely soaked in sweat. Anyone any cleaning tips?
I just turn mine inside out then soak spray them with fabreeze... not perfect but does the job. I looked into dry cleaning once but it was about £50 😱😱

Grahamm

  • Global Moderator
  • GP Hero
  • *****
  • Posts: 6,656
    • Main bike:
      FZ6 04-06
    • View Profile
    • Affordable Leather Products
Re: what did you do with your fazer today ?
« Reply #7989 on: 27 July 2019, 01:50:45 am »
Just need a way to clean the inside of my leathers now, absolutlely soaked in sweat. Anyone any cleaning tips?

If they're that manky, your best bet is a specialist leather cleaning service.

You can do it yourself eg with saddle soap and then a conditioner, but they should have good quality cleaning products.

Whatever you do, don't use washing up liquid or regular detergents as they'll just strip out the natural oils in the leather. Similarly, never dry them on a radiator or near direct heat as that will cause the surface to crack and destroy the waterproofing :(

darrsi

  • GP Hero
  • ******
  • Posts: 10,648
    • Main bike:
      FZS600 00-01
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7990 on: 27 July 2019, 10:33:43 am »



I know it's risky, but if it's simply too damn hot, then.......





More people are born because of alcohol than will ever die from it.

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7991 on: 27 July 2019, 12:05:41 pm »
Brilliant!! to old to give a shit. :smokin
never look down on anyone unless you're helping them up.

fazersharp

  • GP Hero
  • ******
  • Posts: 6,915
  • 10 stone Racing Snake
    • Main bike:
      FZS600 98-99
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7992 on: 27 July 2019, 12:42:31 pm »
Brilliant!! to old to give a shit. :smokin
Correction - he clearly cares very much about his safety with his helmet and goggles  :lol   
I don't do rain or threat there of. dry rider only with no shame.

ogri48

  • GP Hero
  • ******
  • Posts: 1,899
    • Main bike:
      FZS 1000 Gen1
    • - XJR1300 , evo fatty
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7993 on: 27 July 2019, 04:28:50 pm »

a while back I bought a new set of 016s, and promptly fitted the front, along with a triumph 90 degree valve. Then just as I was about to fit the rear, I hadta go to manchester, about a 500 mile round trip, mostly motorways so I left the old rear on. then I had to go to Newcastle. Again didn't want to square me new bridgestone so I left the old one on. another 500 mile round trip and I thought 'better get that new rear on'. that was about a month ago, done a few miles since and it will want mot'ing soon so I thought' right, I REALLY better change that tyre' :lol
Wanted to use the opportunity to fit an angled valve too. and check the rear pads, and tidy it all up....
Anyhoo, I cut the old tyre in half just before I removed it, partly to make it easier to get the bead in the middle of the well when levering it off, and partly to see just how thin they get when you dick around and dont change them when you should. the answer is very... :lol disc rotor screws were a bit of a bitch to say the least.


ogri48

  • GP Hero
  • ******
  • Posts: 1,899
    • Main bike:
      FZS 1000 Gen1
    • - XJR1300 , evo fatty
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7994 on: 27 July 2019, 04:35:17 pm »

so. fitted the valve and the new tyre, then took the rear caliper off. it was pretty shitty, and the pads had 1mm left! only the second time I can remember having to change a set of rears, I guess nowadays I use the back brake as well as the front  :o :o
cleaned up the rusty disc rotor bolts and caliper/torque arm bolts then heat/oil blacked them to stop it happening again. Used the 20/50 mineral oil I put in the harley coz it smells nice when its burning... ;)

ogri48

  • GP Hero
  • ******
  • Posts: 1,899
    • Main bike:
      FZS 1000 Gen1
    • - XJR1300 , evo fatty
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7995 on: 27 July 2019, 04:39:34 pm »

paint was peeling on the disc rotor but they are stainless, so wire brushed it all up and bolted it back together with me newly treated screws. looked 'andsome, especially with the angled valve. shoulda done that three years ago...
cleaned up everything else ready for assembly. new EBCs were a lot thicker than the old uns :eek

ogri48

  • GP Hero
  • ******
  • Posts: 1,899
    • Main bike:
      FZS 1000 Gen1
    • - XJR1300 , evo fatty
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7996 on: 27 July 2019, 04:43:17 pm »
wheel back in an caliper assembled and fitted with treated bolts. looks a helluva lot better. Degreased around the sprocket before cleaning her up completely. For 44k and fifteen years shes wearing well. I foccing love this bike...

agricola

  • GP Hero
  • ******
  • Posts: 1,042
  • Man on a mission
    • Main bike:
      FZ6 S2 07-09
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7997 on: 27 July 2019, 09:09:52 pm »
Just need a way to clean the inside of my leathers now, absolutlely soaked in sweat. Anyone any cleaning tips?
I just turn mine inside out then soak spray them with fabreeze... not perfect but does the job. I looked into dry cleaning once but it was about £50 😱😱


The problem is that the labels say it cant be cleaned in any way. So, ive wiped all around the lining and the inside of the leather with a damp cloth and a drop of fabreze in it, same with the boots and gloves, let hem dry, then gave the insides a waft of antiperspirant/deoderant spray. Smells ok now. Ill saddle soap the outer tomorrow.

fazersharp

  • GP Hero
  • ******
  • Posts: 6,915
  • 10 stone Racing Snake
    • Main bike:
      FZS600 98-99
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7998 on: 27 July 2019, 10:40:42 pm »
If I go out and get a bit hot I hang them outside under cover and let the air circulate up the trouser legs. But I have the luxury of choosing when I ride which along with choosing dry weather also includes choosing not too hot weather either. If I did not have that luxury I would have shitty leathers that I did not care for and some others that I woulkd       
I don't do rain or threat there of. dry rider only with no shame.

coffee

  • GP Hero
  • ******
  • Posts: 2,251
  • Phil Bradbury,like road racing,ireland,music
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: what did you do with your fazer today ?
« Reply #7999 on: 28 July 2019, 01:21:18 am »
wheel back in an caliper assembled and fitted with treated bolts. looks a helluva lot better. Degreased around the sprocket before cleaning her up completely. For 44k and fifteen years shes wearing well. I foccing love this bike...





You can tell,and a cracking job,looks a treat. :thumbup
never look down on anyone unless you're helping them up.