Author Topic: blue dot callaper (Read 2777 times)

wraith600 · « **on:** 21 September 2011, 07:43:32 am »

just looking through hoot poop and see this

http://www.foc-u.co.uk/wiki/index.php?title=Blue_Dot_Calipers_on_Rear_(600s_only)

it's wrong they will fit you just need to file a small section of the mount bracket off and i mean a small amount it will not affect the strength of the bracket i ran one on the back of my fazer for over 6 years

oldmotherfoccer · « **Reply #1 on:** 21 September 2011, 09:16:43 am »

I depends which blue spot caliper it has to be from a fazer thou, which again is not the same as the R1 R6 or XJR so as you say it needs a slight amout removing, but care must be taken on which blue spot you buy

Farjo · « **Reply #2 on:** 21 September 2011, 08:14:54 pm »

If you can provide more details it could be added to that page.

oldmotherfoccer · « **Reply #3 on:** 26 September 2011, 03:23:19 pm »

Deefer says my post should give the right info, so people dont assume that "blue dot" will fit regardless

griff86 · « **Reply #4 on:** 26 September 2011, 04:06:32 pm »

The FZS1000 Gen1 rear caliper is the the only one that fits the FZS600.

Like stated its only a small amount of filling to the hanger and it fits fine.

Works great, looks great especially with the FZS1000 torque arm.

wraith600 · « **Reply #5 on:** 27 September 2011, 02:19:43 pm »

all i got now are some photos as ive changed the hole back end to a mille set up

Author Topic: blue dot callaper (Read 2777 times)

wraith600

blue dot callaper

oldmotherfoccer

Re: blue dot callaper

Farjo

Re: blue dot callaper

oldmotherfoccer

Re: blue dot callaper

griff86

Re: blue dot caliper

wraith600

Re: blue dot callaper