Bikes, Hints'n'Tips > FZS600 Fazer

LED Flashers

(1/6) > >>

Geedog:
Hi all
So I’ve got some LED flashers on the bike now and swapped the old flasher relay or an LED one...can anyone enlighten me as to why they dont flash? They just light up once and stay on....do I need inline resistors too?


Help?!


TIA
Aaron

BBROWN1664:
Sounds like you have a dodgy relay. Is this with the engine running as well as when its off?

If you put the original one back in do they flash too fast? The LED's may already have resistors fitted making the resistance too high so you would need to go back to the standard relay if they flash normally with the standard relay

Geedog:
They flash with the original but too fast and not all of the LEDs light up..
With the new relay they all light up but dont ‘blink’ with the bike running or off.
They dont pear to have any resistors fitted to them..

BBROWN1664:
sounds like a dodgy relay

Hugh Mungus:
I reckon it's a dodgy relay too.


The original one is doing what is expected when you put LED indicators on. Not all the LEDs are lighting up because it's going too fast so don't worry about that part.

Navigation

[0] Message Index

[#] Next page