Date: 20-04-24  Time: 03:33 am

Author Topic: FZ1n indicators  (Read 963 times)

fizzer999

  • Cager in Training
  • Posts: 4
    • Main bike:
      I don't own a bike
    • - main
    • View Profile
FZ1n indicators
« on: 15 June 2018, 08:04:02 pm »
hi ,
whats the best clear or LED indicators for a direct fit for the FZ1 ?
basically looking for plug n play so no messing around with wires etc.
cheers

b1k3rdude

  • Foc-u Helpful Foccer
  • Global Moderator
  • GP Hero
  • *****
  • Posts: 2,411
    • Main bike:
      FZ1 Faired Gen2
    • - GSF 1250
    • View Profile
Re: FZ1n indicators
« Reply #1 on: 15 June 2018, 09:53:27 pm »
basically looking for plug n play so no messing around with wires etc.

Real simple and cheap - replace the stock bulbs with LED like I did, these bulb ware bright to enough replace 10 and 21w indicators bulbs, you will also need a LED friendly indicator relay -
Also in my case I am running BikeIt indicaters because a) they are smaller and b) because the stalks are rubber so bend in a spill and unlick stock, so wont crack your fairing.
And indi-spacers, which I put a small hole in for the little lug on the indicators that stops the indicator from rotating -
Total price is cheaper than most4x dedicated LED indicators, and I can take a little video of mine of you lik.
« Last Edit: 15 June 2018, 09:54:21 pm by b1k3rdude »

Hugh Mungus

  • Club Racer
  • ****
  • Posts: 435
    • Main bike:
      Other
    • View Profile
Re: FZ1n indicators
« Reply #2 on: 15 June 2018, 10:32:01 pm »
I recently bought an adjustable indicator relay - pretty much the same as the bright orange one at £1.99 in b1k3rdude's link (except mine cost 99p inc post from China which is ok if you can wait 6 weeks for delivery). I bought 5 which wasn't so daft as the first one I tried didn't work!!!


I had to make up extension wires to get it to fit - most of these relays won't just plug in without any modification.

fizzer999

  • Cager in Training
  • Posts: 4
    • Main bike:
      I don't own a bike
    • - main
    • View Profile
Re: FZ1n indicators
« Reply #3 on: 16 June 2018, 09:39:45 am »

Dudeofrude

  • GP Hero
  • ******
  • Posts: 2,345
  • Rude, Crude and Tattooed
    • Main bike:
      FZ1 Naked Gen2
    • View Profile
Re: FZ1n indicators
« Reply #4 on: 16 June 2018, 10:42:23 am »
They will be fine mate. I ditched the originals a few months back in favour of L.E.D and they are so much better.
I went for the Oxford saturn ones as they were some of the best looking but I wouldn't recommend them as they all had to be glued back to the rubber mounts after about 6 weeks.
Have a look at the 2015+ R1 indicators, they are priced but very nice

fizzer999

  • Cager in Training
  • Posts: 4
    • Main bike:
      I don't own a bike
    • - main
    • View Profile
Re: FZ1n indicators
« Reply #5 on: 19 June 2018, 04:11:38 pm »
thanks ,
my next question is where is the flasher relay on a 2010 fz1n ?just so I dont strip parts off I dont need to  :)

fizzer999

  • Cager in Training
  • Posts: 4
    • Main bike:
      I don't own a bike
    • - main
    • View Profile
Re: FZ1n indicators
« Reply #6 on: 19 June 2018, 05:22:38 pm »
found it  :rolleyes