Bikes, Hints'n'Tips > Fazer 1000/FZ1 corner

LED BULBS

(1/2) > >>

Andy W:
Hi,
Can anyone let me have the codes for LED version of side light bulbs please?
Seem to have bought ones that are too small for the holders.  :wall

b1k3rdude:

--- Quote from: Andy W on 04 May 2018, 11:02:30 am ---Can anyone let me have the codes for LED version of side light bulbs please?
--- End quote ---
They are just w5w/501 wedge bulbs -

https://www.google.com/search?q=w5w+wedge+led&ie=utf-8&oe=utf-8&client=firefox-b

(corrected typo)

Gaz66:
You'll need 501's ... 502's don't exist

Andy W:
Thanks folks..... :)


I did the full dashboard LED swap as well as the side lights - big improvement for a few quid!  :D


Next up is LED cluster bulbs at the tail end!


By the by, I splashed out on Oxford Nano indicators & they are gloriously bright & very discreet BUT they keep flashing too fast when the bike is at low revs....I have used the resistors that came with them, cleaned/renewed all the connections & rang the non existent Oxford tech help dept. only to get no help whatsoever!
A chap at my local main dealer suggested trying using 2 or 3 resistors only as Yams can play up a bit but that didn't work either.
Besides which, surely the problem is a lack of resistance.......?
Curious!


I did these lighting improvements before going to France for 10 days, over 2000 miles round trip - I will post some pics & info in a new thread.

b1k3rdude:

--- Quote from: Andy W on 20 May 2018, 08:49:35 am ---
* Nexrt up is LED cluster bulbs at the tail end!
* By the by, I splashed out on Oxford Nano indicators & they are gloriously bright & very discreet BUT
* they keep flashing too fast when the bike is at low revs....I have used the resistors that came with them, cleaned/renewed all the connections & rang the non existent Oxford tech help dept. only to get no help whatsoever!
--- End quote ---

* Halfords do a very good set of rear LED bulbs with a very long warranty - I have a set on my Fazer and Bandit.
* Where the lead long enough (without the resisters) to plug straight into the wiring loom? and did the bullet connectors have a nice snug fit..?
* You need to change the relay to one designed for LED bulbs - https://www.sportsbikeshop.co.uk/motorcycle_parts/content_prod/73833

Navigation

[0] Message Index

[#] Next page