Date: 18-04-24  Time: 06:36 am

Author Topic: Potential FZS600 Box Eyr  (Read 3520 times)

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Potential FZS600 Box Eyr
« on: 24 October 2017, 08:28:32 pm »
Looking to see if intrest in my fzs600 boxeye in blue

Reasonable condition, standard all around aside from End Can, HyperPro Springs, and Braided Lines

reason for sale just not used any more, was a good first bike for me a few years back but no more

20K ish miles, MOT due this week so should hopefully pass with clean bill of health
 














NB - You can see the inner Clamp is reversed, this is where i had to get a engine shop to drill into a blank as i tried to remove the old stud and could not








Small dent in tank, literally from where i think bars have hit it at some point, not sure, and light scuff on fairing....

Had issue with snapped exhaust stud, ended up with Cylinder head off and repaired at engine shop by drilling into a blank opposite, no issues since and no corrosion on the studs as all replaced, well looked after

Treated with hammerite as needed.....etc

Did have R6 shock on but removed - might sell but may also re-use

Rear tyre loads left literally done a few hundred miles....nice end can etc

Calipers re-built by powerhouse, all smooth, front and rear, new seals etc the lot no rust on pistions

Rear end stripped and re-greased i.e. swingarm pivot back....

No issues with leaking for seals, no funny noises from timing chains etc, runs real nice, starts on the button

New battery also purchased for it when i got it so not original old one but 3 years old...

Been garaged, has been ridden in all weather no reason not too.

As said, good condition, not a minter, but ideal first bike, i just do not use, MOT check will show that i.e. low milage etc, 1500 miles between 2015 MOT and one i tried to get recently but failed due to brakes and electrical issue on headstock harness, brakes serviced and new headstock wiring loom fitted so expext MOT pass

Wont sell without one, so still may not sell if not happy etc....

Location North East - Durham

Cheers


Anutz
« Last Edit: 24 October 2017, 10:04:26 pm by anutz »

BBROWN1664

  • Administrator
  • GP Hero
  • ******
  • Posts: 13,070
  • Should get out more!
    • Main bike:
      FZS600 00-01
    • - Tracer 900
    • View Profile
    • My website
Re: Potential FZS600 Box Eyr
« Reply #1 on: 24 October 2017, 08:44:07 pm »
put the price and location along with a couple of pictures and people will respond more.
Another ex-Fazer rider that is a foccer again

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #2 on: 24 October 2017, 08:45:33 pm »
will do BBROWN....ta need to get em uploaded

Northern Biker

  • Weekend Warrior
  • ***
  • Posts: 100
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #3 on: 27 October 2017, 12:04:16 am »
How much fella? Can't see a price  :thumbup 
I could be interested but it sounds like you're not entirely sure you want to sell it anyway!

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #4 on: 02 November 2017, 09:02:26 am »
MOT passed, and had it out for a good ride so happy to sell, if anyone intrested let me know.


No advisorys - clean MOT pass

tommyardin

  • GP Hero
  • ******
  • Posts: 2,836
    • Main bike:
      I don't own a bike
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #5 on: 02 November 2017, 02:38:38 pm »
still no price mentioned :rolleyes

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #6 on: 02 November 2017, 03:59:58 pm »
still no price mentioned :rolleyes


asking 1200...but prepared to accept offers etc






tommyardin

  • GP Hero
  • ******
  • Posts: 2,836
    • Main bike:
      I don't own a bike
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #7 on: 02 November 2017, 06:58:01 pm »
still no price mentioned :rolleyes


asking 1200...but prepared to accept offers etc


1200 quid is not unreasonable, the bike could be a project that just needs a little TLC as you said its not a minter but also its certainly not a minger either.
Mine was in the same sort of condition when I purchased it, Mine is a 2003 and i paid £1925 for it 4 and a half years ago, since then I have injected some time and energy and a bit of dosh and it has made a great steed.
You say your willing to consider offers, could be a good buy for someone.
20K is no mileage.

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #8 on: 22 January 2018, 01:56:46 pm »
Any interest here?


Lovely weather for it  :b

Skyjorkko

  • Cager in Training
  • Posts: 2
    • Main bike:
      I don't own a bike
    • - fazer
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #9 on: 23 January 2018, 09:58:19 am »
We appreciate the information that was packed with quality that can not be reduced.

hopefiendboy

  • DAS Born Again
  • **
  • Posts: 72
  • Second time Fazer owner- back to the womb
    • Main bike:
      FZS600 00-01
    • - none
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #10 on: 01 February 2018, 05:10:10 pm »
Have you still got the kit for the r6 shock conversion?

anutz

  • GP Hero
  • ******
  • Posts: 1,035
    • Main bike:
      FZS 1000 Gen1
    • - FZS 600, GSXR 750
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #11 on: 01 February 2018, 05:21:21 pm »
yes.....i think so...


I have the shock and the dog bones, need to check if i have the bolt and spacers, i am sure i do, will check


hopefiendboy

  • DAS Born Again
  • **
  • Posts: 72
  • Second time Fazer owner- back to the womb
    • Main bike:
      FZS600 00-01
    • - none
    • View Profile
Re: Potential FZS600 Box Eyr
« Reply #12 on: 08 February 2018, 11:47:53 am »
ok- message me if you do!