Date: 29-03-24  Time: 13:45 pm

Author Topic: stuttering fzs 600  (Read 258433 times)

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #450 on: 17 August 2012, 11:52:35 am »
you can tell THE BLADE IS BACK.......feeling a bit peckish now  ;)
................yes!! trouble is now red?...we got to watch he dont ...lure...us over to the DARK SIDE!!....cant be making mistakes on your ride" at this stage mate?? :\ ......between us mate?..i do think ...help"..is available for the old fella...but to be fair ?  thats not our shout  :rolleyes .....

yes ....know what you mean mate.....that was too close for comfort last time,we were very lucky then....as regards the "help". the old fella has got to admit to ths problems before anybody can help him  :\ :\
One, is never going to be enough.....

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: stuttering fzs 600
« Reply #451 on: 17 August 2012, 11:54:55 am »
hmmmmmmm........the force is strong with these two ! :lol

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: stuttering fzs 600
« Reply #452 on: 17 August 2012, 11:55:53 am »
ive cut a couple of lenghts of 16mm od steel tubing to reduce the size of my compression tool.ive also cut a slot length ways so i can remove the collets....ive cut about a quarter out as dont want to weaken the tube too much....its going to be a struggle getting the collets out through such a small opening but i`ll give it a go  :D
..............if i remember right?....we did similar but used a trolley jack handle!!!  ...the slot that lowers the jack was spot on for coletts  ;)  and the diameter was roughly 16mm on that?

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: stuttering fzs 600
« Reply #453 on: 17 August 2012, 11:59:33 am »
oh yeah.............i remember now Clive. ya right! :lol :lol :lol

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #454 on: 17 August 2012, 07:00:32 pm »
ok.....night off tonight......got some spare ribs on the go and some of ben and jerrys finest chilling in da freezer..........working tomorrow but might have a bit of spare time to spend on the fazer  ;)
One, is never going to be enough.....

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: stuttering fzs 600
« Reply #455 on: 17 August 2012, 07:15:11 pm »
red mate?...dont borrow them sling backs off the blade!!...once you in his pocket you wont get out!!i think he may be recruiting for some sicko star wars cult thing he got going??????
hmmmmmmm........the force is strong with these two ! :lol
..............he ,s been making all sorts of innuendos t,ward me!! :\ ....and now wants to be my bitch!!! 8) 

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #456 on: 17 August 2012, 07:51:23 pm »
red mate?...dont borrow them sling backs off the blade!!...once you in his pocket you wont get out!!i think he may be recruiting for some sicko star wars cult thing he got going??????
hmmmmmmm........the force is strong with these two ! :lol
..............he ,s been making all sorts of innuendos t,ward me!! :\ ....and now wants to be my bitch!!! 8)




yea....noticed that on your leccy post.....all he has to do is wave his wand and fix your bike and hes got you in his pocket......now hes gone chicken  ;)
One, is never going to be enough.....

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: stuttering fzs 600
« Reply #457 on: 17 August 2012, 08:13:53 pm »
well?...lets hope he stays that way!!!..... :rolleyes ......ime a married slave!!....

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: stuttering fzs 600
« Reply #458 on: 18 August 2012, 12:05:56 am »
fool !

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #459 on: 18 August 2012, 08:11:28 pm »
no time for the fazer today.....got a small job to do at work tomorrow so should have time to try my modified compressor tool  ;) ......looked at machine mart catalog and they do the right tool for £23 so it might be a ride out on the thou  ;) 
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #460 on: 18 August 2012, 09:44:58 pm »
gave myself a kick up the back side and got out to the garage......my adapted tool did`nt work as i only have one pair of hands  :rolleyes ......so looked at the other one....with slight adjustments with an angle grinder and closing the jaws up in the vice i was able to get one of the valves out  :D ......also tried to get it back in again aswell.....very fiddly with the collets and my fat fingers and the lighting is not too good in the garage but i did manage it  ;)
 so will see if i can regrind all the valves on one cylinder tomorrow......fingers crossed  :)
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: Stuttering fzs 600
« Reply #461 on: 19 August 2012, 01:21:56 pm »
Afternoon fazer fettling fanatics......nice day so set up bench in garden and removed all 16 valves  :D ...No horror stories, but I can see why compression was low, all valves are going to need regrinding, cyl 2+3 worse than 1+4 which backs up my compression test figures.
 Another 90 mins to add to the time taken, not sure what I am up to now.  :\
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #462 on: 19 August 2012, 09:13:06 pm »
bit more progress.ive re-ground all the valves on no1 cylinder and re-fitted them  :D  cleaned up well with no pitting  ;) ............just another 12 to go  :\ ..........another 2 hours to add to the total  ;)
One, is never going to be enough.....

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: stuttering fzs 600
« Reply #463 on: 19 August 2012, 09:48:05 pm »
bit more progress.ive re-ground all the valves on no1 cylinder and re-fitted them  :D  cleaned up well with no pitting  ;) ............just another 12 to go  :\ ..........another 2 hours to add to the total  ;)
.........hi, red, you done good? ;) ....you have 14hours left in the kitty!!.....glad you progressing anyway?....got mine in a million bits at mo!!..fkn wiring everywhere?.....dont ask?..... :rolleyes ......

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #464 on: 20 August 2012, 06:42:54 am »
oh.....only 14 hours left  :\ .....wont ask about your problem then.......................................................................................
...oh.hows the sparks on your bike  :D
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #465 on: 21 August 2012, 09:24:49 pm »
busy at work again now,so not much more done,managed to get out in the garage tonight for an hour and re-ground another 4 valves and re-fitted them  :D ....... getting boring now  :\ ........ah well only another 8 to go ;)
 going to try and do another 4 tomorrow and also measure the shims so i can order them at the same time as ordering the gasket,sounds like a good plan  8) [size=78%] [/size]
One, is never going to be enough.....

CRH

  • GP Hero
  • ******
  • Posts: 1,156
    • Main bike:
      FZS600 02-03
    • View Profile
Re: stuttering fzs 600
« Reply #466 on: 21 August 2012, 09:33:57 pm »
you didnt say what condition the valve guides where in?......someone on ebay sellin a assortment of shims?..worth a look? ;) ..sorted mine!! chk post!

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #467 on: 22 August 2012, 06:54:52 am »
hi clive......valve guides all good.no damage to valves nice and straight,all looks very clean in there and i think first time the heads been off.....grinding of the valves is boring but rewarding..i have a nice matt grey ring on both the valve seat and valve.no pitting what so ever  :D
 will take a look at your leccy post later.......well done matey  :D
One, is never going to be enough.....

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: stuttering fzs 600
« Reply #468 on: 22 August 2012, 10:17:27 am »
hi clive......valve guides all good.no damage to valves nice and straight,all looks very clean in there and i think first time the heads been off.....grinding of the valves is boring but rewarding..i have a nice matt grey ring on both the valve seat and valve.no pitting what so ever  :D
 will take a look at your leccy post later.......well done matey  :D
gud jawb Red...........go get em valve boy !!! ;) ;) ;) ;) ;) dont bother with clives post matey.....bored the crap right out ov me. :rollin :rollin :rollin :rollin :rollin :rollin :rollin only kidding darling ! mwah x

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #469 on: 22 August 2012, 10:59:26 am »
i do like this sort of work......but at the back of my mind....i dont think it will solve the stutter  :\ ....but it will make it run better/smoother  :D ....did find myself looking at another set of carbs last night  :eek
One, is never going to be enough.....

ade the blade

  • Club Racer
  • ****
  • Posts: 416
    • Main bike:
      Other
    • - xl1000v varadero
    • View Profile
Re: stuttering fzs 600
« Reply #470 on: 22 August 2012, 07:42:32 pm »
i do like this sort of work......but at the back of my mind....i dont think it will solve the stutter  :\ ....but it will make it run better/smoother  :D ....did find myself looking at another set of carbs last night  :eek
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #471 on: 22 August 2012, 09:34:18 pm »
i do like this sort of work......but at the back of my mind....i dont think it will solve the stutter  :\ ....but it will make it run better/smoother  :D ....did find myself looking at another set of carbs last night  :eek
:'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(




mmmmmmmmmmmmmmmmmmmmmmmmmmmmm
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #472 on: 22 August 2012, 09:39:54 pm »
easy day at work today so straight out in the garage when i got in.......ground in the last 8 valves  :D :D :D :D :D :D .will re-fit them tomorrow  ;)  also measured the shims,inlet are ok but all 8 exhaust shims need to go up a size,3 of the old shims i can re-position so i only need 5 new ones....ordered these tonight along with the head gasket from WEMOTO .....£56 delivered...could have got it cheaper but ordering everything from one supplier has saved on postage  ;)
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #473 on: 22 August 2012, 09:41:42 pm »
you didnt say what condition the valve guides where in?......someone on ebay sellin a assortment of shims?..worth a look? ;) ..sorted mine!! chk post!


hi clive....saw the ebay ad....works out cheaper for me to buy new  :) but thanks for the tip  :D
One, is never going to be enough.....

red98

  • GP Hero
  • ******
  • Posts: 6,567
    • Main bike:
      FZS 1000 Gen1
    • - FZS600,CB400/4,X7,CB250
    • View Profile
Re: stuttering fzs 600
« Reply #474 on: 22 August 2012, 09:42:34 pm »
forgot to mention.....another 90 mins to add to the total  :D
One, is never going to be enough.....