Date: 29-03-24  Time: 15:44 pm

Author Topic: WANTED.....Gen 1 complete running engine  (Read 2303 times)

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
WANTED.....Gen 1 complete running engine
« on: 02 July 2016, 07:55:06 pm »
Hello Foccers, As per title, in need of a reasonably low mileage complete engine in black. Anyone got one laying about or know where I can source one ?
 
Had a chain malfunction today and put a hole in the crankcase.  :'(

RMT1983

  • WSB Pack Hound
  • *****
  • Posts: 606
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #1 on: 02 July 2016, 09:06:28 pm »
ive got half a silver engine with 150k miles on it! hahahaah any good? lol

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #2 on: 02 July 2016, 09:12:41 pm »
Let me think about that........Will it fit up your rectum ?  sideways  :lol

RMT1983

  • WSB Pack Hound
  • *****
  • Posts: 606
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #3 on: 02 July 2016, 09:33:03 pm »
if you buy it ill give it a go!!!

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #4 on: 03 July 2016, 08:30:36 pm »
My mate had the same issue with having the chain snap and smashing a hole in the crankcase. He took the sump off and collected all the broken bits, then cleaned out the bottom of the engine and got the pieces of crankcase and rebuilt with liquid metal. Runs fine with no leaks.
If it's broken, it's not fixed.

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #5 on: 03 July 2016, 09:03:45 pm »
Thanks for that Nickodemon, once I get it out I may look into something like this. The hole it made was quite large and so far I have only recovered two large pieces and several small bits so piecing it all back together is going to be painstaking but interesting that it worked for your friend. Thankyou.  :thumbup

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #6 on: 03 July 2016, 09:47:24 pm »
Liquid metal can cover any small missing pieces. The sump cover is easily removed it's simply undoing the bolts and removing. You will need to buy a new sump gasket and take the downpipes off for good access. When you have sump cover off you will get a good view of the crank. My mates crank had marks on the counter balancers on the crank and it still runs as before, so as long as you remove any debris it should be fine. :)
« Last Edit: 03 July 2016, 09:51:56 pm by nickodemon »
If it's broken, it's not fixed.

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #7 on: 03 July 2016, 10:13:40 pm »
Good to know, thanks. All my exhaust header nuts came off OK bar one which is rusted so bad the socket wont get a purchase on it. As soon as I can undo that one and remove the headers, I will drop the sump and look for debris. I'm assuming he done this with the engine still in place ?

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #8 on: 03 July 2016, 10:19:47 pm »
Yes, engine was still in place. It honestly isn't difficult as he is in no way a good mechanic. Simply get the bits stick some liquid metal between the parts and try and piece them together. Once you have attached the bits let them set. Once they have hardened smother the crankcase in liquid metal to cover the cracks and missing bits. ;)
If it's broken, it's not fixed.

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #9 on: 03 July 2016, 10:22:17 pm »
Forgot to add if the header nut is rounding buy a torx socket and hammer it on to get the foccer off :lol
If it's broken, it's not fixed.

dazza

  • GP Hero
  • ******
  • Posts: 2,424
    • Main bike:
      FZS 1000 Gen1
    • - MT10
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #10 on: 03 July 2016, 10:35:50 pm »
That's really helpful, Thanks.  ;)

nickodemon

  • GP Hero
  • ******
  • Posts: 1,721
    • Main bike:
      FZS 1000 Gen1
    • - Aprilia tuono V4
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #11 on: 03 July 2016, 10:53:30 pm »
No worries :thumbup
If it's broken, it's not fixed.

slimwilly

  • GP Hero
  • ******
  • Posts: 3,698
  • I love to ride them hills
    • Main bike:
      FZ1 Faired Gen2
    • View Profile
Re: WANTED.....Gen 1 complete running engine
« Reply #12 on: 07 July 2016, 06:40:31 am »
Hammer the FOCCER off Dazza
An ageing test pilot for home grown widgets that may fail at anytime.