Date: 28-03-24  Time: 22:45 pm

Author Topic: Stainless nuts and bolts.  (Read 3825 times)

davec

  • Weekend Warrior
  • ***
  • Posts: 111
    • Main bike:
      FZS600 00-01
    • View Profile
Stainless nuts and bolts.
« on: 22 January 2012, 02:00:28 pm »
Any ideas on the best place to get Stainless nuts and bolts from?

bagnall18

  • Cager in Training
  • Posts: 5
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Stainless nuts and bolts.
« Reply #1 on: 22 January 2012, 05:54:37 pm »
ebay type in fzs600 probolt there's loads of stuff and different colours  :)

Gnasher

  • Foc-u Brake Doctor
  • GP Hero
  • ******
  • Posts: 5,601
    • Main bike:
      FZS600 98-99
    • - ZX10R, XJR1300, X10, GSF1000GT
    • View Profile
Re: Stainless nuts and bolts.
« Reply #2 on: 23 January 2012, 12:03:43 am »
If it's just engine and other non stressed areas you want the bolts for look on ebay for bolts by the bag you can get 100's for the price of 20 from Probolt, they are very very expensive try these: -
 
http://www.ebay.co.uk/itm/370287148580?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
 
http://www.a2stainless.co.uk/Japanese_B2142Y.aspx
 
https://secure.hosts.co.uk/~custom-fasteners.co.uk/acatalog/Fasteners.html
 
If you want stressed area bolts/nuts i.e. caliper mounting, fork pinch bolts then you need to ensure you get thr correct grade of SS.   
Later

davec

  • Weekend Warrior
  • ***
  • Posts: 111
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Stainless nuts and bolts.
« Reply #3 on: 23 January 2012, 07:58:02 am »
Thanks for your replys.I am looking for rear caliper torque arm bolts and rear caliper bolts so they are going to be stressed. What would you recommend as a good stress grade stainless steel?Thanks.

Lumpy

  • Club Racer
  • ****
  • Posts: 393
    • Main bike:
      FZS600 98-99
    • - Blackbird XX-W, XS1100E
    • View Profile
Re: Stainless nuts and bolts.
« Reply #4 on: 23 January 2012, 08:41:07 am »
Look at other suppliers such as Namricks. Do a search on the internet there are loads around. Pro-Bolt is very top end stuff. A4 is the best grade, A2 is harder but not as corrosion resistant. A4 bolts should be fine for what you want them for, and A2 as well.

davec

  • Weekend Warrior
  • ***
  • Posts: 111
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Stainless nuts and bolts.
« Reply #5 on: 23 January 2012, 09:36:37 pm »
Thanks again,info much appreciated.

Pat

  • Weekend Warrior
  • ***
  • Posts: 218
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Stainless nuts and bolts.
« Reply #6 on: 24 January 2012, 12:51:35 am »
I've used this company a few times over the years for stainless bits  & always found them reasonably priced with good quality & service - http://www.inoxbolt.co.uk/


griff86

  • Club Racer
  • ****
  • Posts: 370
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Stainless nuts and bolts.
« Reply #7 on: 24 January 2012, 07:18:30 am »
http://www.shinybikesyndrome.co.uk/cms/index.php/our-products/pro-bolt-tasty-nuts


Check out Nooj who is a member on this site, this is his website, I'm sure he gets a certain percentage off pro-bolt.

bikerboys

  • Weekend Warrior
  • ***
  • Posts: 239
  • full licenses don't come in cornflake packets!
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Stainless nuts and bolts.
« Reply #8 on: 29 January 2012, 06:44:52 pm »
Can any one tell me the bot size for the handlebars for my fzs 600 98 thanks as these are staring to rustand would like to get some stainless ones thanks  :)
full licenses don't come in cornflake packets!

bikerboys

  • Weekend Warrior
  • ***
  • Posts: 239
  • full licenses don't come in cornflake packets!
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Stainless nuts and bolts.
« Reply #9 on: 07 February 2012, 09:25:46 pm »
 :\ any one give me what size I need please
full licenses don't come in cornflake packets!

Gnasher

  • Foc-u Brake Doctor
  • GP Hero
  • ******
  • Posts: 5,601
    • Main bike:
      FZS600 98-99
    • - ZX10R, XJR1300, X10, GSF1000GT
    • View Profile
Re: Stainless nuts and bolts.
« Reply #10 on: 07 February 2012, 10:24:22 pm »
:\ any one give me what size I need please

8M about 50mm long off the top of my head.
Later

limax2

  • Creep.
  • GP Hero
  • ******
  • Posts: 1,929
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Stainless nuts and bolts.
« Reply #11 on: 08 February 2012, 08:41:40 pm »
The four cap head screws for the handlebar clamps are M8 x 30mm long. (FZS600)
i.e. 30mm from under the head to the end of the screw.

bikerboys

  • Weekend Warrior
  • ***
  • Posts: 239
  • full licenses don't come in cornflake packets!
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: Stainless nuts and bolts.
« Reply #12 on: 08 February 2012, 09:22:37 pm »
The four cap head screws for the handlebar clamps are M8 x 30mm long. (FZS600)
i.e. 30mm from under the head to the end of the screw.

 :) thank you just order some stainless steel ,marine grade them buggers not rust [/b] :rollin
full licenses don't come in cornflake packets!

Juliofantastico

  • Cager in Training
  • Posts: 2
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Stainless nuts and bolts.
« Reply #13 on: 12 February 2012, 07:55:03 pm »
Got Titanium set of nuts and bolts from Probolt.