Author Topic: Multi-gauge Multi-buy? (Read 45960 times)

schlumpf · « **Reply #100 on:** 07 October 2014, 05:02:24 pm »

Thanks for that, corrected version is uploaded.

fazerblue · « **Reply #101 on:** 26 October 2014, 07:44:02 pm »

hi fazer390 could you tell me where you got the chrome surrounds for your clocks

fazer390 · « **Reply #102 on:** 27 October 2014, 11:05:35 am »

Hi Fazerblue, regarding the (aluminium) 'Clock Rings' / surrounds; unfortunatly these were comissioned a few years ago by Devilsyam. Only around a dozen or so sets were made. I beleive the chap that actually made them has since died!

The only way to get some now is to commission someone else / engineering company... :-/

shrekster · « **Reply #103 on:** 28 October 2014, 07:36:35 pm »

I'll take one as well.
Jim.

shrekster · « **Reply #104 on:** 28 October 2014, 07:37:53 pm »

I'll take one as well.
Jim.

shrekster · « **Reply #105 on:** 28 October 2014, 07:39:52 pm »

I'll take one as well.
Jim

fireblake · « **Reply #106 on:** 28 October 2014, 09:47:49 pm »

I would just like to say that I think the Multigauge is an amazing piece of kit.

Loads of handy applications

Tuckerhauser · « **Reply #107 on:** 13 January 2015, 11:27:50 pm »

Been reading up and im gonna treat myself to one of these.

fazed out · « **Reply #108 on:** 14 January 2015, 09:51:01 am »

Christian put one down for me when there are in stock

Tuckerhauser · « **Reply #109 on:** 14 January 2015, 10:09:46 pm »

Out of production at the mo, maybe another batch in a couple of months

MrL · « **Reply #110 on:** 02 July 2015, 02:10:53 pm »

Hi Christian,
Are there dates planned for any more of these to be made yet ?

Don71uk · « **Reply #111 on:** 02 July 2015, 02:21:06 pm »

If you look on the American fazer site one of the members is make a batch, and orders are being taken,

Don.

fazed out · « **Reply #112 on:** 02 July 2015, 08:29:28 pm »

I might be up for 1,,i had put interest on grommets page in the fazer site in the states has i thought Cristian wasn't making anymore,,,,

schlumpf · « **Reply #113 on:** 02 July 2015, 09:48:07 pm »

Yes, it's back in production, but it will take me some more weeks to complete. Guess begin of August would be the right time.
Grommet is also working on a batch. Seems to have some trouble/delay with his production shop..
Feel free to order from him if he's faster. Software and function is the same. Maybe shipping is more easy from my place.

Electronics and display is a complete redesign. That's the main reason for the long silence. Check out the according FZ1OA thread (backwards) if you like to see some pictures of the internals and background. Though my board design is totally different we kept it very similar in function and final look.

mickvp · « **Reply #114 on:** 03 July 2015, 02:09:22 pm »

Will we see some images of your new design and function, perhaps with a prototype etc beforehand Christian? I am interested in one of these type of gauges myself - but don't mind waiting and I'm not on the U.S. Forum.

schlumpf · « **Reply #115 on:** 03 July 2015, 02:35:01 pm »

Sure. Version 9 is the one we talk about:
http://cvieth.bplaced.net/ganganzeige_bilder.html

Display size has increased slightly.
Imprint on the faceplate has been dropped, would be too small.
Backlight is LED-white as standard (before amber/yellow).
All functions as before. Speedohealer function always in. A few minor SW improvements, mostly not visible.
Prepared to connect a GPS modul.
Fuel economy display if wired to the fuel pump.

fazed out · « **Reply #116 on:** 04 July 2015, 08:44:46 pm »

Christian put me down for 1 also i have white dials can you do a white face plate regards gaz

Andy FZS · « **Reply #117 on:** 04 July 2015, 10:19:48 pm »

For anyone who's interested I have what I believe is a vesion 7 and it does what it says on the tin so to speak.

schlumpf · « **Reply #118 on:** 04 July 2015, 10:37:48 pm »

White is possible. Would have to take a rattle can as there is no way to get white anodized plates. But it will look very nice.
I will let you all know as soon as I'm sure to confirm a delivery. All further details to follow then.
Many thanks. It's always very helpfull for my little "cottage factory" to know upfront how many people are interested

tomlinscote · « **Reply #119 on:** 05 July 2015, 09:13:18 am »

Count me in for one if the price is right :-)

Tuckerhauser · « **Reply #120 on:** 08 July 2015, 09:08:21 pm »

Add me to the list Christian please

Thanks

bigbluebear · « **Reply #121 on:** 09 July 2015, 10:36:46 am »

I'd be quite interested too....how easy/difficult are they to install. I have looked at the instructions which is beyond my capabilities (hopeless with electrics)

Stewie · « **Reply #122 on:** 09 July 2015, 10:57:11 am »

Can you do these for a gen 2?
If so I could be interested.

Falco9 · « **Reply #123 on:** 09 July 2015, 12:23:46 pm »

Quote from: bigbluebear on 09 July 2015, 10:36:46 am

I'd be quite interested too....how easy/difficult are they to install. I have looked at the instructions which is beyond my capabilities (hopeless with electrics)

I find myself in the same boat, electrics in general are beyond my limited capabilities. I'm very keen on purchasing one of these but only if I can find someone to do the wiring...

tex · « **Reply #124 on:** 09 July 2015, 12:47:21 pm »

I had mine done at the local computer shop, as long as they can solder circuit boards shouldn't be a problem